Warning adhesive tape, non-slip, luminous
Hazard warning adhesive tape non-slip luminous
HAZDWARNTPE-SA-NONSLP-YELL/BLACK-50MMX6M
Register now and access more than 125,000 products
- Self-adhesive
- For medium to high loads
- Prevents slipping and falling accidents
- With silicone paper
- Meets the requirements of DIN 4844 or DIN EN ISO 7010
- Tape can be driven over by industrial trucks, passenger cars, commercial vehicles, etc. Revolving and turning on the tape should be avoided.
- Yellow-black tape for permanent hazard points and obstacles
- For outdoor use, apply butyl primer first. This significantly increases the adhesion strength of adhesive tape on all surfaces.
- The adhesion surface must be dry and free from grease and dust.
Datasheets(X)
Non-slip warning marking for hazard points indoors and outdoors, such as stairs and ramp edges, work areas, lifting platforms, workshop pits, wet areas.
Colour | Yellow-black |
Material | PVC - Polyvinyl chloride |
Adhesive base | Acrylate |
Length | 6 m |
Width | 50 mm |
Thickness | 1 mm |
Min./max. temperature conditions | -5 to 50 °C |
Shelf life from production/conditions | Unlimited / cool and dry storage area, no exposure to sunlight, 15°C to 25°C |
Last viewed
Universal connection piece for dust extraction
WM 1 wall bracket
Flat chisel In line with DIN 6453
Contact spray Oxidation solvent
Metric combination wrench with POWERDRIV®
1/4" multi-socket wrench insert bi-hex, multi profile
First segment With G 1/2 inch female thread for pneumatic air multi-port distributors
Pneumatic rubber wheel
1C combination foam PURLOGIC DUO
1" slider bar With pin detent