For detailed information, other images and documents, please select individual articles from the following table.
Warning adhesive tape, non-slip, luminous
Good visibility in the dark and R13 slip-resistance according to DIN 51130.
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
Photoluminescent
- - Luminance: After 20 min: 1.6 mcd/m², after 60 min: 1.0 mcd/m².
- - Increases safety in dark areas, thereby reducing slip and fall accidents.
For light to medium traffic
- Withstands heavy foot traffic and light pallet truck traffic.
- R13 non-slip rating in accordance with DIN EN 16165.
Easy to apply
- Self-adhesive and easy to apply.
- Can be walked on immediately after applying.
Versatile application
- Ideal for walking routes, work areas, machines, vehicles and other slip-prone areas.
- Supports the meeting of marking and occupational safety requirements (e.g. colour-coded hazard warning, 5S).
Aluminium oxide abrasive
- Securely bonded to a low-temperature resistant PVC film by means of an epoxy resin seal and an acrylic copolymer adhesive.
- Durable.
- Waterproof, chemical-resistant and mineral oil-resistant.
- Luminance reduces slightly over time.
- Pivoting and turning on the tape by industrial trucks or other heavy vehicles as well as pushing pallets over the tape should be avoided. This can damage the tape.
Ideal for anti-slip marking of floors, stairs, ramps, machines, vehicles, and many other areas indoors and in weather-protected outdoor areas. The fluorescent, photoluminescent surface prevents slipping and reliably ensures safety in all lighting conditions.
For optimal adhesion, the surface must be clean, dry and free from release agents such as grease, oil, surfactants, dirt and dust. The use of butyl primer is also recommended outdoors and on certain surfaces - particularly concrete and asphalt, untreated and uncoated wood and all rough and grained surfaces.
The hazard warning adhesive tape must be pressed firmly into place following installation to improve adhesion and durability. A press-on roller is particularly suitable for this purpose.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!