Door handle A 803 on oval escutcheon
Door handle hole plate A 803
DH-A2-A803-OVAL-ROS-L/R-MATT
Register now and access more than 125,000 products
- Handle and base rosette are permanently connected and ensure the best possible hold, attachment is via rivet nuts and metric screws
- Versatile combination options and low storage costs, as all articles individually available
- The hole plates can be used in DIN R and DIN L doors without alteration
Square pins or panic pins must be ordered separately.
The FS approval only applies to complete Würth FS sets or combinations of Würth FS individual parts that form a coordinated assembly in accordance with DIN 18273. Only genuine Würth parts may be used for assembly. The assembly work, incl. all components (screws and pins), must be performed by a qualified expert according to the instructions. Failure to do so will void any warranty claim.
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
For real estate sector (tubular frame doors)
 | |
Punched-hole | 0 - not applicable |
Area of application | Private area, Object area |
Rosette thickness | 13.5 mm |
Suitable for | House doors, Office doors, Surgery doors, Profiled frame doors, Tubular door frames |
Design | 0 - not applicable |
Fire protection certified | No |
Shape of door handle | 0 - not applicable |
Bearing Technology | Door handle, fixed, Spring-mounted |
Material | Stainless steel A2, 1.4301 |
Gloss level | Matt |
Surface | 0 - not applicable |
Colour | 0 - not applicable |
DIN direction | DIN R/L |
Standards | EN 1906 |
Utilisation category | Class 4 |
Environmental Product Declaration | Yes |
Type of assembly | Screw-on |
Square size | 8 mm |
Spindle | 0 - not applicable |
Insertion depth | 32 mm |
Handle length | 173 mm |
Handle diameter | 21 mm |
Hole distance | 50 mm |
Length of rosette | 70 mm |
Width of rosette | 33 mm |
Handle height inc. rosette/ label | 87.5 mm |
Knob/handle plate/loop handle | 0 - not applicable |
| For art. no. 0687 158 030 | Classification key in line with DIN EN 1906: 2012-12 | ||||||
| 4 | D9* | - | 0 | 1 | 4 | 0 | A |
| * 1 million test cycles, tested according to MPAZert | |||||||
| For art. no. 0687 158 530 | Classification key in line with DIN EN 1906: 2012-12 | ||||||
| 4 | D9* | - | B1 | 1 | 4 | 0 | A |
| * 1 million test cycles, tested according to MPAZert | |||||||
Last viewed
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Metric combination wrench with POWERDRIV®
CLL-A universal bracket
Female safety connections. Series 2000 with safety valve with conical system
Clamping rods For airline profiles
Round wire snap ring and snap ring groove for drill holes
Half-shell trapezoidal crimping insert
1/2 inch power cardan joint With 1/2 inch square drive and ball lock
Round cable passage in two parts
Paint tank for ADVANCE W9 gun