Ultimate sanitary neutral sealant Sanitary
SEAL-NEUT-SANI-ULTIMATE-BRWN-R8017-310ML
Register now and access more than 125,000 products
- High-quality, 1-component, neutral-cure, alkoxy silicone sealant
- Permanent elasticity
- High resistance to both high and low temperatures
- Outstanding adhesion on virtually all construction materials
- Compatible with most insulating glass edge seals and PVB safety glass films
- High resistance to UV radiation
- Low elasticity modulus
- Very easy to spray and apply, even at lower temperatures
- High resistance to ageing and weather conditions
- EC1 Plus label: very low VOC emissions
- The rapid skin formation time reduces the risk of sealant contamination
- Low odour
- Not suitable for long-term immersion.
- Not suitable for mirrors.
- Not suitable for use on bituminous surfaces.
- Not suitable for use on PE, PP, PA, PTFE (Teflon).
- Not suitable for use on polyacrylate and polycarbonate.
- Not suitable for use on natural stone (may cause stains).
- Cannot be painted over.
- Compatible with most edge seals and PVB laminated glass films. Due to the many systems on the market and the fact that their composition can be changed by the manufacturer, this does not guarantee compatibility with all systems.
CE compliant EN 15651-1: F EXT-INT 25 LM
CE compliant EN 15651-2: G 25 LM
CE compliant EN 15651-3: S
GEV Emicode EC1 Plus label: very low VOC emissions
French VOC emissions class A+
SNJF: Façade 25 E + Vitrage 25 E (Société National du Joint Français - French National Union of Seals and Facades)
Datasheets(X)
- Sealing of glazing joints
- Perimeter joints around window frames
- Sealing of connection joints in the construction industry
- Ideal for expansion joints
- Suitable for rooms with continually high relative humidity
- Good ventilation is important during application and curing.
- The surfaces should be firm, dry and clean.
- If necessary, degrease with MEK, methanol or ethanol.
- The user should check for themselves whether the product is suitable for the application. Please contact our technical service if necessary.
- A primer may be required on very porous surfaces, in the event of adhesion problems or in demanding usage conditions.
- Use a manual or pneumatic cartridge gun to dispense the product from the
- cartridge/foil packaging.
- The size and shape of the joint is very important. Avoid thin joints.
- Do not subject to thermal, mechanical or chemical stress before curing is complete.
- Suitable joint widths from 5 mm to 30 mm
- Joints up to 10 mm wide: The joint depth must correspond to the joint width. Joints wider than 10 mm: Joint depth = (joint width/3) + 6 mm.
- After curing, remove the product mechanically.
Container | Cartridge |
Contents | 310 ml |
Chemical basis | Neutrally networked silicones, with alkoxy basis (alcohol basis) |
Fungicidal properties | Yes |
Colour | Chocolate brown, similar to RAL 8017, Red, Brown |
Min. skin-formation time | 5 min |
Ultraviolet resistance | Yes |
Continuous motion absorption | 25 % |
Density | 1.04 g/ml |
Smell/fragrance | Characteristic |
Full curing speed/conditions | 4 mm/d / 23°C and 50% relative humidity |
Shelf life from production | 12 Month |
Min./max. processing temperature | 5 to 40 °C |
Min./max. temperature resistance | -50 to 150 °C |
Coating compatibility | Yes |
Recoatable/Can be painted over | No |
Min. breaking elongation | 320 % |
Number per pallet | 1500 PCS |
Last viewed
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
Central locking plate for recessing
Bit holder E 6.3 (1/4 inch) with stainless steel sleeve and snap ring
24 V Standard ABS/EBS plug For brake systems
Straight pin, unhardened DIN 7, A1 stainless steel, plain
Spring cotter pin with double loop, zinc-plated steel
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Turbo diamond cup wheel
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Mitre system bolt for cam lock nut with M6 thread