pias® wing-type drilling screw, countersunk head with AW drive
Wing-pias steel flake zinc silver cntrsnk. head AW
SCR-DBIT-WNG-CS-CUTHD-AW30-(LFR)-6,3X60
Register now and access more than 125,000 products
Drilling screws may only be used where dampness is not to be expected. For fasteners with a construction permit, the permit, and in particular Part 2 "Special regulations", must always be observed.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d) | 6.3 mm |
Length (l) | 60 mm |
Head diameter (dk) | 12 mm |
Drill tip length (lp) | 6 mm |
Other standard | Company standard |
Material | Steel |
Surface | Flake zinc silver-grey |
Head type | Countersunk head 80 degree |
Internal drive | AW30 |
Thread type | UNC |
Min. recommended substructure thickness | 2 mm |
Max. material thickness to be drilled through (metal) (lU) | 6 mm |
Max. material thickness for wood (lH) | 40 mm |
Min./max. recommended installation speed (idling) | 800-1200 rpm |
RoHS-compliant | Yes |
Last viewed
Comfort breathing mask - folded 3M Aura 9300+
LED side marker light PRO 24V Universal
Backing pad For hook-and-loop disc
Nail anchor SHARK® Hammer TYPE FK A2
Power spray glue plus
1/2 inch torque wrench with push-through ratchet
Cordless drywall screwdriver ATS 18 AUTOMATIC M-CUBE
Headband for welding helmet Solar II
Drive screw for Fixograss 9000 drilling jig, SBL-3 and VBL-2
Collated nails and gas cartridge NG CS-2/3 HFB