pias self-drilling screw with hexagon head and drill tip case-hardened steel, zinc-plated, blue passivated
SCR-DBIT-HEX-FLG-WS5,5-(A3K)-3,5X9,5
Art.-no. 021435 95
EAN 4011231272681
Register now and access more than 125,000 products
- Reduces installation time by at least 50 % thanks to the drill tip and enables drilling without centre-punching, thread forming and fastening, all in one step
- Suitable for component combinations tI/tII in accordance with ETA-10/0184, steel/steel for dia. 4.2 mm and 6.3 mm
- A suitable drill/driver (e.g. cordless drill/driver with depth stop) must be used with self-drilling screws
- The use of impact drivers is not permitted
- Self-drilling screws must be inserted perpendicular to the surface of the component
Zinc plated self-drilling screws must only be used where permanent dampness is not expected - condensation is not considered permanent dampness (corrosion category ≤ C2 in accordance with DIN EN ISO 12944-2). For fasteners with technical approval, the approval, and in particular Part 2 "Special regulations", must always be observed.
Datasheets(X)
Last viewed
Cylinder saw adapter A2 With ejection function
L-shaped key TX, short version
Pin contact MKS PLUS 1.5
Steel nail
Fixing clamp pliers
Nozzle For lever riveter HNG 26/28
CA preparation unit size 1, filter regulator
Refuse bag Without pull tie
System assortment 4.4.1, double-jointed socket wrench, bi-hex
Serrated locking nut with locking teeth steel strength class 8, zinc-plated, blue passivated (A2K)