Welcome to Würth Canarias For trade customers only

pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated

pias W-214 steel zinc plated hexagon head
SCR-DBIT-WS8-(A3K)-4,8X16
ZEBRA PIAS

Art.-no. 021448 16
EAN 4011231272964

Prices for customers after login
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated

Art.-no. 021448 16

Prices for customers after login
Quantity
PU
x 500 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

For attaching steel profiles to steel substructures ≤ 5 mm

Reduction of the assembly time using the drill bit tip by min. 50%:


  • Drilling without centrepunching

  • Thread moulding

  • Securing

All in one operation



Suitable for component combinations tI/tII according to approval ETA-10/0184


  • Steel/steel for ∅ 4.2 mm-6.3 mm
Notice
  • Drilling screws must be processed with a suitable drill driver (e.g. cordless drill driver with depth stop)

  • The use of impact screwdrivers is not permitted

  • Drilling screws must be attached perpendicular to the surface of the component

Zinc-plated drilling screws may only be used where dampness is not to be expected. For connection elements with a construction permit, the permit, and in particular Part 2 "Special regulations", must always be observed.

Product information

Datasheets(X)

CAD data (available after login)

Certificates/ Documents

 | 

 | 

Normes

CS

Matière

Steel

Finition

Zinc plated

Conforme à la norme RoHS

Yes

Forme de tête

Hexagon head

Type d’entrainement

Hexagon

Type de filetage

Self-tapping screw thread

Forme de pointe

Drilling tip

Underground

Steel, Aluminum

Diamètre nominal (d1)

4.8 mm

Longueur (l1)

16 mm

Head diameter (dk)

10.5 mm

Hauteur de tête (k1)

4.45 mm

Drill tip length (lp)

5.75 mm

Screw-thread length with drill tip

12 mm

Entrainement extérieur (s1)

WS8

Max. material thickness to be drilled through (metal)

4.4 mm

For max. substructure thickness

3 mm

Min./max. attachment thickness

1.8-7 mm

Approval

ETA-10/0184

Min./max. recommended installation speed (idling)

1200-1800 rpm

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information