pias® drilling screw, hexagon head A2 stainless steel
pias W-214 stainless steel A2 plain hexagon head
SCR-DBIT-A2-WS7-4,2X25
ZEBRA PIAS
Register now and access more than 125,000 products
Reduction of the assembly time by the drill tip by min. 50%:
- Drilling without graining
- Thread moulding
- Securing
all in one operation
Suitable for component combinations tI / tII according to approval ETA-10/0184
- ALU/ALU
- Drilling screws must be processed with a suitable drill driver (e.g. cordless drill driver with depth stop)
- The use of impact screwdrivers is not permitted
- Drilling screws must be attached perpendicular to the surface of the component
Datasheets(X)
CAD data (available after login)
 | |
Standards | CS |
Material | Stainless steel A2 |
Surface | Plain |
RoHS-compliant | Yes |
Head type | Hexagon head |
Drive type | Hexagon |
Thread type | Self-tapping screw thread |
Shape of tip | Drilling tip |
Underground | Aluminum |
Nominal diameter (d1) | 4.2 mm |
Length (l1) | 25 mm |
Head diameter (dk) | 8.8 mm |
Flange diameter (dk) | 8.18 mm |
Head height (k1) | 4.0 mm |
Drill tip length (lp) | 5.5 mm |
Screw-thread length with drill tip | 22 mm |
External drive (s1) | WS7 |
Max. material thickness to be drilled through (metal) | 4.5 mm |
For max. substructure thickness | 3 mm |
Min./max. attachment thickness | 1.5-17 mm |
Approval | ETA-10/0184 |
Min./max. recommended installation speed (idling) | 1700-2500 rpm |
Last viewed
System case 8.4.1 transparent
Hexagonal bolt with shank DIN 931, steel 8.8, plain
Stainless steel clamp For pipe collar
Warehouse trolley With loading surface made of wooden plate (MDF) with beech effect
White industrial cloth
Electrician's scissors with wire-stripper notch
Coupling screw
Pipe and fastening clamp Multifix
MS 5000 disconnect pin For turning knob
Shelf support, type A height adjustment using supporting pin