Wood varnish for floors PROTEX
Wood floor lacquer PROTEX
WOLAC-FLOORS-FINISHINGLACK-TEAK-5LTR
Register now and access more than 125,000 products
Easy maintenance
- Single-component product with weather protection (UV radiation, fungi etc.).
- Open-pore product for easy maintenance and controlled erosion.
Excellent adhesion and elasticity.
It adapts to the natural movements of the wood.
Excellent features.
- Excellent resistance to external ageing.
- Fungicidal and insecticidal protection.
- Fast drying, even on tropical woods.
- No odours during application.
- To apply the product, both the product and the surface to be varnished must be at a temperature above 12°C. Do not apply the product with humidity greater than 85 %.
- Open-pore product with controlled erosion. The frequency of maintenance will depend on the
- transit intensity on the surface. It is advisable to carry it out at least once a year.
- For maintenance, clean the surface properly and apply a coat of product.
Note
Annual maintenance is recommended, always depending on surface transit.
These instructions are merely recommendations based on our experience. We recommend performing tests for each new type of application or surface to be treated.
Datasheets(X)
Terraces, decks, changing rooms, swimming pool decks, shower decks, toilets, kitchens etc.
Apply on clean, dry surfaces, free of dust, grease, waxes or any other product that may prevent proper adhesion.
Shake the product before application to achieve correct homogenisation.
Product prepared with the correct viscosity for application.
Easy application: spray, airless, roller, brush or dip.
Utensil cleaning with water.
Water-repellent | No |
Min. through drying | 6 h |
Shelf life from production | 12 Month |
VOC concentration (CH) | 75 g/l |
Density conditions | at 20°C |
Colour | Teak |
Density | 1.25 g/cm³ |
Application quantity in volume/area | 0.70 l/m² |
Min. flash-off time | 360 min |
Max. processing temperature | 50 °C |
Flash-off time conditions | 0 - not applicable |
Conditions for through drying | at 20°C, 65% relative humidity |
Conditions for dust-drying time | at 23°C, 50% relative humidity |
Recoatable/Can be painted over | No |
Application quantity conditions | depending on the absorbency of the surface |
Conditions to maintain shelf life from production | cool and frost-free storage area, in sealed original container |
Chemical basis | Acrylic copolymers |
Min. processing temperature | 12 °C |
Dust-drying time | 1 h |
Max. through drying | 24 h |
Contents | 5 l |
Weight of content | 5.075 g |
| Technical data | |
| Viscosity (Ford Cup no. 4) | 12 inches |
| Specific weight | 1025-1050 g/cm3 |
| Film appearance | According to colour |
| pH | 9 |
| Solubility | Water |
| % of solids | 20 % +/- 1 % |
| Recommended application | 2 hands of 60-80 g/m2 per hand |
| Gloss type | Semi-matte gloss (30-40 %) |
| Expiry | 12 months from manufacture (in its original packaging, perfectly closed and in temperature conditions between 10ºC and 40ºC). |
| Rd >45 slip resistance | *Class 3 (UNE-ENV 12633:2003) |
| Dry to the touch (50 g/m2 at 20ºC and 60 % RH) | 1 hour |
| Drying for 2nd hand (50 g/m2 at 20ºC and 60 % RH) | 3 hours |
Last viewed
System insert 8.4.1, circlip pliers
Gypsum plasterboard anchor W-GS type K with reinforced centring point
MFD-S combi stone drill bit assortment 10 pieces
Allen key set, hexagon socket 9 pieces
Plastic holder For double open-end wrench assortment
Round nut with trapezoidal thread
Hammer drill H 22-SLE
Dispenser for liquid soap
Screwdriver set 5 pieces
Centre drill bit For hammer core drill bit