Wire cup brush Crimped stainless steel with M14 connecting thread
Cup brush corrugated stainless steel wire
CPBRSH-AG-WAVED-SST-D65MMXM14
Register now and access more than 125,000 products
- Efficient machining of large surfaces thanks to wire cup brush with crimped wire
- Crimped wire bristles support each other and thus increase stability during brushing
- For direct use on angle grinders
- Only the bristle tips act on the workpiece. Excessive contact pressure does not improve the result, but increases the required drive power and reduces the service life of the brush.
- For optimal results, use on angle grinders with adjustable speed.
- Always wear safety goggles and protective gloves when working with machine brushes!
| Instructions for use (optimising brushing results) | ||||
| Measurement | Peripheral speed | Brush diameter | Wire thickness | Bristle length |
| Increase brushing effect | ↑ | ↑ | ↑ | ↓ |
| Reduce brushing effect | ↓ | ↓ | ↓ | ↑ |
| Brush creates ridge | ↓ | ↑ | ↓ |
| Applications | Peripheral speed [in m/s] | Recommended peripheral speeds for brushing | ||||||
| 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | |
| Deburring | 25 - 35 | |||||||
| Cleaning welding seams | 35 - 45 | |||||||
| Removing scale | 35 - 45 | |||||||
| Polishing | 30 - 40 | |||||||
| Plastic machining | 15 - 25 | |||||||
Datasheets(X)
- Removing paint, dirt and rust
- Derusting and polishing
- Light deburring work
 | |
Diameter (D) | 65 mm |
Usable length of wire (H) | 20 mm |
Tool holding device (d) | M14 |
Wire diameter | 0.35 mm |
Material of wire | Stainless steel |
Design | Corrugated |
Suitable for angle grinder (point system) | 4 of 4 points |
Max. rotation speed | 12000 rpm |
EN standard | 1083-2 |
Last viewed
System insert 8.4.1, circlip pliers
1/4 inch socket wrench insert, metric short
Battery for CLL 18, CLLG 18 and PLL 18
Fixing clamp
Gas filter A2 For breathing protection series 175
Quick-action chuck Metal sleeve
Lens for full-vision goggles Andromeda
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
Unprinted Klapp-Fix number plate holder
Plus Quadro-L Vario hammer drill bit