Wing-type drilling screw, countersunk milling head with AW drive SC8
Steel black countersunk milling head SC8 AW
SCR-DBIT-WNG-CS-SC8-AW30-(SOS)-6,3X70
Register now and access more than 125,000 products
Material
Case-hardened carbon steel
Surface
- Black
- Cr(6)-free
- approx. 500 hrs. no base metal corrosion (salt-spray mist test in accordance with DIN EN ISO 9227 - NSS
Processing of hardwood and softwood by countersunk head with milling ribs
Optimal power transmission and protection of corrosion protection by the AW drive
Only install using equipment with depth stop and claw coupling.
Wing-tip drilling screws must be appropriately tested for usability for each application case.
Datasheets(X)
Wooden floors on steel substructures
Suitable for mounting on steel beams with a steel quality up to a yield strength of 460MPa (tensile strength Rm 520-670 MPa)
Floor attachment in commercial vehicle and platform construction
 | |
Nominal diameter (d) | 6.3 mm |
Length (l) | 70 mm |
Head diameter (dk) | 12 mm |
Drill tip length (lp) | 12 mm |
Other standard | WN 219-9 |
Material | Steel |
Surface | Special coating according to specifications |
Head type | Countersunk milling head |
Internal drive | AW30 |
Min. recommended substructure thickness | 3 mm |
Max. material thickness to be drilled through (metal) (lU) | 8 mm |
Max. attachment thickness (lB) | 52 mm |
RoHS-compliant | Yes |
Last viewed
Contact spray Oxidation solvent
ASSY®plus 4 P CSMR wooden plate screw Hardened zinc-plated steel partial thread with underhead thread countersunk head
Thread die HSS DIN EN 22568 for standard metric ISO threads
Twist drill bit HSS DIN 338 type RW
C 6.3 bit hexagon socket (1/4 inch) with patented POWERDRIV® drive
Jump starter, 12/24 V
Reduction, nickel-plated brass
1/4 inch socket wrench insert TX with hole
Ratchet lashing belt with heavy-duty ratchet
Tapping and chipping hammer BMH 40 BASIC