Wing-tip drilling screw ZEBRA PIAS®
Wing-pias steel zinc plated yellow cs head H
SCR-DBIT-WNG-CS-CUTHD-H2-(A2C)-4,2X32
ZEBRA PIAS
Register now and access more than 125,000 products
- For fastening wood to metal substructures
- Countersunk milling head for use on soft and hard woods
Datasheets(X)
 | |
Nominal diameter (d) | 4.2 mm |
Length (l) | 32 mm |
Head diameter (dk) | 7.8 mm |
Drill tip length (lp) | 8.4 mm |
Material | Steel |
Surface | Zinc plated yellow |
Head type | Countersunk milling head |
Internal drive | H2 |
Thread type | Self-tapping screw thread |
Min. recommended substructure thickness | 1.75 mm |
Max. attachment thickness (lB) | 20 mm |
Last viewed
1/2 inch socket wrench insert metric, hexagon, short
Reducing sleeve 10/8
Occupational shoe Ultra X OBE
Runner For Nova Pro lateral stabiliser
Front locking device for EcoSlide
Garden hoe/small hoe
Adapter For plug-in tools Plus to Max
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel 10.9, zinc-plated, blue passivated (A2K)
Combination filter A2P3 RD For breathing protection series 175
Boot URBAN S3