Window construction screw, self-drilling, countersunk milling head, FEBOS® M
FEBOS M steel zinc plated counters. milling head H
SCR-DBIT-CS-CUTHD-H2-(A2K)-M4X32
FEBOS
Register now and access more than 125,000 products
- Metric thread
- Self-drilling window construction screw for use in UPVC window construction
- For connecting UPVC profiles with the metal reinforcement (up to 2.5 mm) and for securing fittings on profiles with metal stiffening (up to 2.5 mm)
- Greater load capacity threads with thin sheathing iron
The risk of forced advance with large distances between plastic and metal bracing is minimised by the flat, metric thread
If forced advance occurs, the drill tip may break away or the screw break during application.
Datasheets(X)
CAD data (available after login)
 | |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Nominal diameter (d1) | 4 mm |
Length (l1) | 32 mm |
Head diameter (dk) | 7.5 mm |
Head height (k1) | 2.2 mm |
Drill tip length (lp) | 5.2 mm |
Internal drive | H2 |
Head type | Countersunk milling head |
Drill tip diameter | 3.4 mm |
Shape of tip | Drilling tip |
Other standard | WN 207 |
Declaration of performance (EU-CPR) | No |
Thread type | Metric thread |
Thread design | Full thread |
Last viewed
VARIFIX® Standardfix hammer head fastener Pre-assembled with nut and washer, A4 stainless steel
Combination wrench set, extra long 12 pieces
Case
Metric combination wrench with POWERDRIV®
Retaining jaws Adjustable for wire stripping pliers
Chipping hammer MH 10-SE
Universal connection piece for dust extraction
Timing tool set suitable for VW Group 1.8-2.0 TFSI with timing chain 10 pieces
1/2 inch impact socket wrench insert hexagon, metric, short
Ratchet for 10 mm bits