Window adhesive EXPERT set, 5 pieces
Window adhesive set EXPERT, 5 pieces
WNDWADH-EXPERT-SET-310ML
Register now and access more than 125,000 products
2-hour drive-away time with cars with airbag
Relatively easy to squeeze out
With secure pull-off cartridge closure
- Solvent-free and PVC-free
- Short thread tear-off
- Excellent stability
Safety tested
- Drive-away time confirmed with crash test and TÜV certificate according to FMVSS208/212
- Meets requirements of original equipment manufacturers (vehicle manufacturers)
Note
It is essential that Würth active cleaner and Würth Varioprimer are used for surface preparation. The shelf life of the products must be checked before use. Apply adhesive while holding the gun vertically, starting in the middle of the bottom edge of the window. Do not place the vehicle on the lift. Please note the vehicle manufacturer's specifications regarding bead geometry. The application and drive-away times must be observed.
The instructions for use are a recommendation on the basis of tests carried out by us and our experience; perform your own tests before each application. Due to the large number of applications, storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as a consultancy service, no responsibility is taken by this service, except where the advice or information falls within the scope of our specified, contractually agreed service or the advisor has acted intentionally. We guarantee consistent quality of our products. We reserve the right to make technical changes and further developments.
Do not park the vehicle on a lifting platform. Observe the information regarding bead geometry provided by the vehicle manufacturer. The application and drive-away times must be observed. The curing time and ventilation time depend on the ambient temperature and humidity.
Replacement glazing for common vehicles, commercial vehicles, vans and agricultural and construction machinery.
Ensure that the material is applied in a clean working environment. Use the corresponding system components to apply the adhesive. Surface treatment is mandatory. Clean the bonding surfaces (window and body) and leave to air dry for 5 minutes. Apply a thin layer of Varioprimer to the bonding surface of the window and leave to air dry for 10 minutes. Apply the adhesive with the gun perpendicular to the frame, starting from the centre of the bottom edge of the window.
If the paint on the surface to be bonded is damaged or freshly painted, Varioprimer must be applied and left to air dry for 10 minutes. The paint must be allowed to harden completely before the Varioprimer is applied. If the time between trimming the adhesive bead and applying the window adhesive is longer than 8 hours, we recommend activating the trimmed adhesive bead with Varioprimer.
Contents | 310 ml |
Number of pieces in assortment/set | 5 PCS |
Chemical basis | Moisture curing 1K polyurethane |
Colour | Black |
Density | 1.18 g/cm³ |
Min./max. processing temperature | 10 to 40 °C |
Min./max. temperature resistance | -40 to 120 °C |
Drive-away time (with airbag) | 2 h |
Drive-away time (without airbag) | 1 h |
Drive-away time conditions | at 23°C and 50% relative humidity |
Max. open time /conditions | 20 min / at 23°C and 50% humidity |
Shelf life from production | 15 Month |
APPJET-WNDWREP-(V-CUTTING-15MM)-12PCS
PRIM-WNDWADH-(VARIOPRIM-S/E)-20ML
Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2
Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)
Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)
Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.
Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
Last viewed
Allen key, hexagon socket with ball head Extra-long design
Slotted cheese head DIN 84, A4 stainless steel, plain
Elevator tripod made from aluminium
Comfort FFP3 R D breathing mask - preformed 3M With Cool-Flow exhalation valve up to 30 times the threshold value
Acrylic sealant
Asphalt screw anchor pipe reducer
Metric double box-end wrench with POWERDRIV®
Pressure gauge bridge For R134a and R1234yf air-conditioning units
Hand cleaner in tub
Jigsaw blade metal two stars For non-ferrous metals