White automatic hand dryer ABS 2050W
Hand dryer ABS automatic
HNDDRYR-EL-SENSOR-ABS-WHITE-2050W
Register now and access more than 125,000 products
White finish.
- Automatic electronic hand dryer.
- Electronic infrared sensor. Ideal for low energy consumption.
- Installation type: wall.
- 3 mm ABS housing, white finish.
- Designed for communal areas and bathrooms. Suitable for continuous use.
- Robust, anti-theft and secure. Constructed without sharp edges or other hazardous elements.
- Air temperature (ambient temperature of 20°): 60°C.
- Universal brushless motor. No maintenance required.
- Includes thermal safety switch.
- Estimated drying time: 40 seconds.
- Time adjustable by potentiometer from 0 to 90 seconds (2050 W to 1200 W).
- In accordance with European safety directives (EC).
Datasheets(X)
Suitable for use in busy areas such as hospitals, hotels, restaurants, schools and colleges, shopping centres etc.
Place your hands under the hand dryer to automatically start operation.
The hand dryer remains in operation as long as the hands are within the sensor field.
The appliance switches off a few seconds after hands are removed.
Cleaning
Cleaning with a cotton cloth slightly moistened with soap is recommended. Then dry.
Protection class | Protection class II/protective insulation |
Min./max. blower temperature | 40 to 60 °C |
Min./max. air current | 2300-2300 l/min |
Colour | White |
| Technical data | |
| Voltage/Frequency | 220-240 V ∼ 50/60 Hz |
| Total power | 2050 W (optional 1200 W) |
| Engine power | 110 W |
| Engine speed | 2800 rpm |
| Air velocity | 65 km/h |
| Max. consumption | 9 A |
| IEC protection class | Class ll |
| Protection rating | IPX1 |
| Noise level at 2 m | 60 dBA |
| Dimensions | 222 x 100 x 286 mm |
| Weight | 2.6 kg |
Last viewed
Shutter hinge
Round head screw with square neck DIN 603, steel, strength class 8.8, zinc-plated, blue passivated (A2K)
Socket wrench screwdriver with T-handle and magnet
Thermal two-tone high-visibility vest
Flat washer without chamfer DIN EN ISO 7089, steel, hot-dip galvanised (hdg)
Designer furniture handle square T-bar handle
Tipmatic ejector For Nexis Impresso and Click-on 170° concealed hinge, no auto function
Screw with flattened half round head and hexagon socket ISO 7380-1 steel FK010.9, zinc-nickel-plated silver (ZNSHL)
Angled locking plate With plastic insert
3/4" POWERDRIV® socket wrench insert metric, hexagon