Wheel brush Crimped steel, with shank
Wheel brush with shank
WHLBRSH-SHNK-40X4X6MM
Register now and access more than 125,000 products
- Increased stability during brushing
- Crimped wire bristles support each other
- For use on die grinders and drills
- High speeds improve brush performance and service life
- Only the bristle tips act on the workpiece. Excessive contact pressure does not improve the result, but increases power consumption and reduces the service life of the brush
- Always wear safety goggles and protective gloves when working with machine brushes!
Datasheets(X)
- For removing rust, paint, contamination etc.
- Cleaning welded seams
- Light deburring work
 | |
Diameter x usable width x shaft diameter (DxAxS) | 40 x 4 x 6 mm |
Usable length of wire (H) | 9 mm |
Wire diameter | 0.20 mm |
Material of wire | Steel |
Surface | 0 - not applicable |
Design | Corrugated |
Suitable for cordless drills (points system) | 2 of 4 points |
Suitable for drill (points system) | 2 of 4 points |
Suitable for straight grinder (point system) | 4 of 4 points |
EN standard | 1083-2 |
Max. rotation speed | 18000 rpm |
Last viewed
Tool bag with fold-out sides
Countersunk head screw with recessed head, H DIN 965, steel 4.8, zinc-plated, blue passivated (A2K)
Wood screw Hexagon head DIN 571, steel zinc-plated blue
C 6.3 PH bit (1/4 inch)
ALG 18 V M-CUBE charger
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Socket contact Micro Quadlok System (MQS) 0.63 Uninsulated
Alkaline manganese battery 12 V
CUT+COOL Perfect drilling and cutting oil
LED contour light with 90° lamp arm 24V