Wheel brush Braided steel with hole
Round brush steel
RDBRSH-AG-KNOTTED-ST-D150X14X22,23MM
Register now and access more than 125,000 products
- No premature opening of the bundles when the brush is positioned at an angle
- Aggressive brushing effect with high wear resistance thanks to anti-clockwise braiding on the wheel brush
- For use on angle grinders
- Only the edge tips act on the workpiece. While excessive contact pressure does not improve the result, it does increase the required drive power and reduces the service life of the brush.
- Always wear safety goggles and safety gloves when working with machine brushes!
Datasheets(X)
- Removes scale, rust, varnish, slag and rubber residues
- Cleans concrete residue from formwork
 | |
Diameter (D) | 150 mm |
Effective width (A) | 14 mm |
Usable length of wire (H) | 30 mm |
Drill hole (d) | 22.23 mm |
Wire diameter | 0.50 mm |
Material of wire | Steel |
Design | Hardened, braided anti-clockwise |
Max. rotation speed | 12500 rpm |
Aggressiveness | Middle |
Suitable for angle grinder (point system) | 4 of 4 points |
EN standard | 1083-2 |
Last viewed
Plus Quadro-L Vario hammer drill bit
Spiral hook For expander cables
System case 8.4.1 transparent
Rear housing for HES 510
Circlip for bore hole, standard version, shape J DIN 472 for bore holes, spring steel, phosphated and oiled
Pneumatic impact screwdriver DSS 1 inch P
Random orbital disc-type sander ETS 150-E twin
Flat washer with chamfer DIN EN ISO 7090, steel, hot-dip galvanised (hdg), hardness class 200 HV
Grinding disc Würth Line
Thread mandrel With nozzle