WC High cleaner
Sanitary cleaner HIGH CLEANER
DISINF-WC-CONCEN-750ML
Register now and access more than 125,000 products
- Cleans and deodorises bathrooms.
- Ideal cleaner and descaler for toilet bowls, urinals, washbasins, bidets, bathtubs and all surfaces made of sanitary ceramics.
- As well as cleaning and deodorising, it eliminates calcareous and ferruginous residues caused by dripping taps.
- Removes mortar remains from new or recently repaired facilities.
- Eliminates algae, mould, moss in swimming pools and adhered soap scum.
- Contains no soda or solvents.
- Does not produce toxic fumes.
- Hazards. An irritant. Irritating to the eyes, skin and respiratory tract. Carefully read the precautions for use on the container label.
- Biodegradable product, compliant with EC Regulation No. 648/2004 on detergents.
Datasheets(X)
Can be applied from the container itself. The angle on the neck of the bottle makes it possible to reach all upper and lower corners of sanitary areas.
Apply directly onto toilets. Scrub the surface to be cleaned with a brush for a better finish. Then rinse several times with plenty of water. Rinse the sponge or cloth well. Rubber or plastic gloves must be worn.
To brighten taps, soap dishes and tiles, use 1 part WC High Cleaner to 5 parts water.
To remove mortar remains (from new or recently repaired facilities) and mould, algae and moss in swimming pools and water tanks, use 1 part WC High Cleaner to 1 part water.
Contents | 750 ml |
Smell/fragrance | Characteristic |
Colour | White |
Chemical basis | Water and hydrochloric acid |
Bio-degradable | Yes |
| Technical data | |
| Composition | Chlorides, surfactants and corrosion inhibitors formulated on hydrochloric acid |
| Appearance | Milky white liquid |
| pH (2 %) | 1 (acid) |
| Density (20 %) | 1.12 g/ml |
| Viscosity | 3 cPoise (20°C) |
| Expiry | 1 year |
Last viewed
Assembly set For intumescent mat plus
Half-shell hexagon crimping insert
Pneumatic cleaning gun TOP Gun
Plastic base
3/4-inch impact socket wrench insert hexagon, metric, short
Fixanchor internal thread W-FAZ-IG/A4 - push-through installation
Die-cast zinc base with anti-slip plate
Stud with threaded end ≈ 1.25 d DIN 939, steel 5.8, zinc-plated, blue passivated (A2K)
Half-shell hexagon crimping insert
Interchangeable bending head