W-VD-IG internally threaded sleeve, zinc-plated steel for W-VD bonded anchor capsule systems and WIT injection systems in uncracked concrete
Female thread sleeve W-VD-IG/S steel zinc plated
ANC-(W-VD-IG/S)-(A2K)-M16
Register now and access more than 125,000 products
Anchorage via bond between mortar, female thread sleeve and anchoring base
Galvanised steel female thread sleeve in sizes (female thread) M8, M10, M12 and M16
Drill hole cleaning: 3x blow out
Assembly instructions: Insert female thread sleeve using hammer drill or impact drill in rotation + impact mode.
Datasheets(X)
W-VD-IG/S (galvanised steel) can be used in dry indoor areas
Type description | W-VD-IG/S |
Anchor internal diameter metric | IT M16 |
Female-thread length | 40 mm |
Anchor diameter (d) | 22 mm |
Effective anchoring depth (h ef) | 120 mm |
Anchor length (l) (l) | 120 mm |
Nominal drill-bit diameter cartridge system (d 0) | 25 mm |
Drill hole depth (h 0) | 120 mm |
Surface | Zinc plated |
Material | Steel |
Last viewed
ASSY®plus 4 A2 CSMR universal screw A2 stainless steel plain, partial thread, countersunk milling head
Thread cutting tool set HSS M3-M12 44 pcs in system case 8.4.1
Screw with flattened half round head and hexagon socket ISO 7380-1 steel 010.9, zinc-plated blue passivated (A2K)
Spiral hose for compressed air without fittings
Hook and loop fastener support plate For dust-free working and optimum results
1-inch impact socket wrench insert hexagon, metric, short
1/2 inch socket wrench insert metric, hexagon, short
Hammer drill bit Plus Duo-S Vario
1/4-inch socket wrench insert, TX head For external TX screws
Hand tap, second tap HSS DIN 352