W-VD-IG internally threaded sleeve, zinc-plated steel for W-VD bonded anchor capsule systems and WIT injection systems in uncracked concrete
Female thread sleeve W-VD-IG/S steel zinc plated
ANC-(W-VD-IG/S)-(A2K)-M10
Register now and access more than 125,000 products
Anchorage via bond between mortar, female thread sleeve and anchoring base
Galvanised steel female thread sleeve in sizes (female thread) M8, M10, M12 and M16
Drill hole cleaning: 3x blow out
Assembly instructions: Insert female thread sleeve using hammer drill or impact drill in rotation + impact mode.
Datasheets(X)
W-VD-IG/S (galvanised steel) can be used in dry indoor areas
Type description | W-VD-IG/S |
Anchor internal diameter metric | IT M10 |
Female-thread length | 30 mm |
Anchor diameter (d) | 14 mm |
Effective anchoring depth (h ef) | 90 mm |
Anchor length (l) (l) | 90 mm |
Nominal drill-bit diameter cartridge system (d 0) | 16 mm |
Drill hole depth (h 0) | 90 mm |
Surface | Zinc plated |
Material | Steel |
Last viewed
Special drill bit For COLDMELT® anchor
Vulcanising cement
Hexagonal bolt with shank for pressure container construction ISO 4014, steel 5.6, plain
Screwdriver with 1/4 inch tip
Spiral clamping pin, heavy-duty design ISO 8748 steel plain
Adhesive disc with no M14 hole, hard For dry abrasive paper
VDE replacement blade
Drilling screw, hexagon head with long drill tip piasta®
Release tool For connectors with two symmetrically arranged locking lugs
Multi-line laser MLPG 22