W-UR 6 SymCon plastic frame fixing with zinc plated steel countersunk head screw and SymCon thread

Secure connections

• Virtually no spinning of the anchor sleeve due to low installation torque and expansion


• Reliable follow-up expansion capability due to ingenious anchor geometry


• Virtually no undercutting due to optimal compression of the anchor sleeve by screwing in the screw

Minimal installation work

• Improved load transmission through even, continuous load transfer across the entire expansion area


• Anchorage via friction locking between anchor sleeve and base material


• Hammer-in stop prevents premature expansion of the anchor during installation


• Minimal installation work because the anchor sleeve and special screw are pre-assembled


• Anchor sleeve made of high-quality polyamide

W-UR 6 SymCon and W-UR F 6 SymCon (galvanised steel): European Technical Approval ETA-11/0309.

The anchor has European Technical Approval for use in multiple attachment of non-load-bearing systems (e.g. suspended ceilings etc.).

• Anchoring base with approval: Standard concrete ≥ C12/15


• Anchoring bases without approval: Solid brick, solid sand-lime brick, vertically perforated brick, hollow sand-lime brick, hollow lightweight concrete blocks, solid bricks and blocks made of lightweight concrete


• Installation temperatures: Temperature of anchoring base:≥ –20°C Temperature of wall plug body:≥ 0°C