W-RD plastic frame anchor without collar, in natural colour

Name: W-RD plastic frame anchor without collar, in natural colour
Brand: Würth
SKU: 0912810802

Plastic frame anchor, W-RD without collar
ANC-(W-RD)-PLA-WO.COLLAR-30-10X100

Art.-no. 0912810802

EAN 4047376504431

All versions

Specification

Excellent application due to expansion in four directions and anti-rotation lock

Flexible application

In-place installation facilitates and speeds up installation

Time savings due to immediate load-bearing capacity

Virtually no spinning of the anchor sleeve due to low installation torque and expansion

Hammer-in stop prevents premature expansion of the anchor during installation

Can be used outdoors or in wet rooms in conjunction with a stainless steel screw

Effective stability and protection

Strong anti-rotation lock

High working loads due to expansion in four directions

Improved load transmission through even, continuous load transfer across the entire expansion area

Special properties

Anchor sleeve made of high-quality polyamide

Halogen and silicone free

Thermally stable from -40 °C to +80 °C

Inconspicuous natural colour without additional dyes or coatings

Proof of Performance

Performance data determined in Würth test laboratory

Notice

The screw length should correspond to the length of the anchor plus the diameter of the screw

Use wood or chipboard screws without an optimised thread tip (drill tip, counter thread, ring thread etc.)

Create the drill hole

Clean the drill hole

Set anchor and screw

Screw in the screw

Screw in screw until flush

Create the drill hole

Clean the drill hole

Set anchor and screw

Screw in the screw

Screw in screw until flush

Performance data determined in Würth test laboratory

Application

Application area

Suitable for light and medium loads

Suitable for fastening wardrobes, curtain rails, wall shelves, lightweight wall cupboards, wall-mounted cabinets, mirrors, picture frames, cable clamps, electrical switches, washbasins, wooden beams, wooden laths, metal rails, angle brackets, profiles, information signs etc.

Suitable for attaching components in conjunction with wood or chipboard screws without an optimised thread tip (e.g. drill tip, counter thread, ring thread etc.)

Secondary attachments: Concrete and solid and perforated block masonry

Suitable for anchoring in normal weight concrete, masonry walls (solid brick, solid sand-lime blocks, vertically perforated brick, hollow sand-lime blocks, hollow lightweight concrete blocks, solid lightweight concrete blocks)

Instructions

Drill perforated and hollow concrete blocks with a rotary drill (without hammer mechanism)

Drill cuttings must be removed from the drill hole

Installation temperature in base material ≥ -20 °C

Installation temperature of the anchor sleeve ≥ 0 °C

Technical information

Anchor diameter	10 mm
Anchor length (l)	100 mm
Max. attachment height (t fix)	30 mm
Nominal drill-bit diameter (d 0)	10 mm
Through-hole in the component to be connected (d f)	10.5 mm
Screw diameter	7 mm
Drill hole depth (h 0)	80 mm
Drill hole depth (h 1)	80 mm
Type description	W-RD 10, without collar

Performance data
Anchor diameter [mm]			6	8	8	10
Effective anchorage depth h_ef [mm]			50	50	70	70
Permissible load¹⁾ (Tensile, shear load and diagonal tensile force at every angle)	Concrete	F_rec [kN] ≥ C20/25¹⁾	0,4	0,4	0,5	0,5
	Solid brick Mz, EN 771-1, DIN 105 ≥ NF (≥ 240 x 115 x 71)	F_rec [kN] ≥ Mz 36¹⁾	0,2	0,3	0,4	0,3
	Solid sand-lime brick KS, EN 771-2, DIN 106 ≥ NF (≥ 240 x 115 x 71)	F_rec [kN] ≥ KS 20¹⁾	0,4	0,4	0,5	0,5
	Solid bricks and solid blocks made of normal weight concrete EN 771-3, DIN 18153 ≥ NF (≥ 240 x 115 x 71)	F_rec [kN] ≥ Vbn12¹⁾	0,4	0,4	0,6	0,6
	Solid bricks and solid blocks made of lightweight concrete EN 771-3, DIN V 18152-100 ≥ NF (≥ 240 x 115 x 71)	F_rec [kN] ≥ V4¹⁾	0,1	0,2	0,3	0,3
	Vertically perforated brick HLz, EN 771-1, DIN 105 ≥ 2DF (≥ 240 x 115 x113)	F_rec[kN] ≥ Hlz 20¹⁾	0,1	0,2	0,2	0,1
	Hollow sand-lime brick KSL, EN 771-2, DIN 106 ≥ 2DF (≥ 240 x 115 x113)	F_rec [kN] ≥ KSL 6¹⁾	0,1	0,2	0,4	0,4
	Hollow concrete block made of lightweight concrete 3K Hbl, EN 771-3, DIN 18151 ≥ 16DF (≥ 497 x 237 x 241)	F_rec [kN] ≥ Hbl 6¹⁾	0,1	0,2	0,1	0,3
¹⁾ The recommended loads were obtained with the plug screw with countersunk head in accordance with DIN 97.

Characteristic values
Concrete	Axis distance	s ≥ [mm]	100	100	100	100
	Edge distance	c ≥ [mm]	70	70	70	140
	Minimum member thickness	h_min ≥ [mm]	100	100	100	100
Edge distance	c ≥ [mm]	100	100	100	100
Minimum member thickness	h_min ≥ [mm]	115	115	115	115