Vulcanised fibre discs TRANS-KALT WÜRTH
Vulcanised fibre disc TRANS-KALT
FBRDISC-(TRANS-KALT)-CORUNDUM-G36-D115
Register now and access more than 125,000 products
- 25 % temperature decrease.
- Clear view of the surface.
- Longer useful life.
- Quick cut.
- Sanding angle between 5° and 15° for reduced wear and scratches.
- Applicable for grinding corners, no possibility of chipping.
- Easy assembly.
- Triangular fixing nut M-14.
- Materials:
Corundum: 115 mm diameter
Zirconium: 115 mm diameter. Specifically for stainless steel.
Fleece: 115 mm diameter.
Safety measures
Wear protective goggles or shield
Wear suitable gloves
Wear a noise-resistant helmet
Wear masks
Read the instructions
Datasheets(X)
For grinding and removing welding seams, rust, stripping panels, rust and paint, in materials such as: cast iron, forged steel, non-ferrous metals, stainless steel, plastic, wood etc.
Last viewed
Standard cable tie with plastic latch
Car sponge
Thread cutter for TIME-SERT® Made of HSS
Tapered pin with female thread, unhardened DIN 7978, plain steel, unhardened
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated (A2K)
ASSY® D
plug screw Pan head, without drill tip
Hexagon nut, type B/A4 DIN 934 A4 stainless steel, with washer, in accordance with DIN EN ISO 7089 (DIN 125), A4 stainless steel
Curtain For portable protective welding screens
Contrast goggles, yellow
3D hinge dia. 16 mm