Ventilation pipe clamp TIPP® AERO
Ventilation pipe clamp TIPP AERO 2
VENTPIPCLMP-AERO-M8/M10-200MM
TIPP
Register now and access more than 125,000 products
Specially designed for ventilation pipes
Two sealing plugs
Improved adjustment to pipe tolerances
Practical sealing plugs
Recessed head up to a nominal width of 400, hexagonal bolt M10 including nut from a nominal width of 450
Quick-action coupling up to DN 400
Quick and easy mounting. Can also be mounted individually. When the clamp is closed, the closure snaps into the screw.
High-quality galvanising up to DN 400
Extremely attractive appearance for visible areas
TIPP® pipe clamps are particularly characterised by:
- Sound insulation for DIN 4109
- Resistance to ageing and weathering
1. Rubber insert:
- EPDM profile rubber insert for DIN 4109
- Heat resistance: -50°C to +110°C
- Halogen and silicone-free
2. Ventilation clamp:
- Galvanised up to 400 mm
- Sendzimir-galvanised strip material from 450 mm
- Nut-and-washer assembly M8/M10 throughout
- Sealing plugs: M6 x 25 mm
- Crosshead screw up to DN 315, M6 x 40 mm
- Crosshead screw DN 355 + DN 400, M10 x 35 mm + hexagonal nut M10, DIN 934 from DN 450
Advantage of 2 sealing plugs
Improved adjustment to pipe tolerances
Advantages of quick-action coupling
- Quick and easy mounting
- Can also be mounted individually
Datasheets(X)
Suitable for DN nominal width (∅D) | DN.. 200.. |
Connection thread (G) | M10 |
Permissible load | 0.6 kN |
Min./max. temperature resistance | -50 to 110 °C |
Material of rubber profile | EPDM |
Silicone-free | Yes |
Halogen-free | Yes |
Last viewed
Allen key
Twist drill bit HSS DIN 338 type RN 118°
pias® drilling screw, raised countersunk head with AW drive
Allen key, hexagon socket with ball head Extra-long design
End cap set For screwing/clipping on
Nozzle For manual riveting tool
Circlip pliers, shape A for shaft circlips
Bollard base
Diamond cutting disc Super Cantero Evo
Fully insulated PVC push connector, easy entry