Ventilation grille with covering edge
Ventilation grille plastic
VENTGRIL-PS-BLACK
Register now and access more than 125,000 products
- Air inlet 200 cm², meets the requirements of the equipment industry
- Large clamping range from 2 mm to 23 mm
- Flexible use, limited stock required
Subject to technical changes! Specified dimensions not binding.
Datasheets(X)
The ventilation grille can be inserted in the cut-out from the front or from above. Secure the ventilation grille from the rear using adjustable click-in clips. When assembling from above, you can increase the air flow by enlarging the cut-out. Countersink with 10-mm mill.
 | |
Material | Plastic |
Colour | Black |
Length | 458 mm |
Width | 65 mm |
Air vent | 200 cm² |
Min./max. grip range | 2-23 mm |
Min. grip range | 2 mm |
Max. grip range | 23 mm |
Milled-hole length | 448 mm |
Milled-hole width | 56 mm |
Last viewed
Pan head tapping screw, C shape with H recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), shape C, with tip
Plus Longlife & Speed tile chisel
Hand tap, taper tap HSS DIN 352
Manual fastening stamp
Knife pouch
Sealing ring, vulcanised fibre, shape A
Edge protection angle Made of plastic
Twisted rod For rivet nut setting pliers HES 510
Adapters 10 mm x 1/4 inch
Plug-in nipple Series 2000