Vehicle finishing disc
Finishing disc
DSPAP-USEIT-SG2-2000-D50MM
ZEBRA
Register now and access more than 125,000 products
Significantly shorter grinding and polishing times
Outstanding removal rate with up to 6x higher grinding performance.
Full-surface extraction
Thanks to the foam-mesh fabric, the sanding dust is extracted thoroughly from the entire surface, resulting in a uniform grinding finish.
Pressure-equalising, absorbent and permeable
The uniform structure of the foam material guarantees the controlled absorption and release of water.
Safe operation
The foam material prevents pointed pressure on the surface - The risk of sanding through on edges, beading and curves is reduced to a minimum.
Datasheets(X)
Ideal for wet and dry sanding.
Form | Washer |
Diameter (Ø) | 50 mm |
Grinding pattern | 2000 |
Adhesive system | Hook and loop |
Material of abrasive medium | Aluminium oxide |
Last viewed
Hand tap, second tap HSS DIN 352
ZD 7 handle hole
Over dead centre tensioner With belt and A2 flat hook
Tarmac fixing bolt W-SA A-IG
Hexagonal bolt with thread up to the head DIN 933, steel 10.9, zinc-plated, blue passivated (A2K)
Hexagon nut, low profile with fine thread DIN 439, A4 stainless steel, plain
1/2 inch socket wrench insert metric, hexagon, short
Hexagon socket screw-in nut with collar DIN 908, A4 stainless steel, plain
O-ring, metric
Lithium button cell 3 V