Vehicle dry abrasive paper roll Arizona® Perfect
Sandpaper roll Arizona Perfect
DSPAP-ROLL-P120-115MMX50M
Art.-no. 5506247112
EAN 4045989429851
Register now and access more than 125,000 products
- Up to 20% higher material removal and service life increased by over 90%
- Short sanding time and efficient work
| Backing material | P40-100, D-paper P120-240, C-paper P280-600, B-paper |
| Binding | All-synthetic resin |
| Coating | P40-180, stearate coating P220-600, special coating that prevents clogging |
| Abrasive material | P40-80, ceramic abrasive grain P100-600, aluminium oxide |
| Scattering | Open scattering |
| Colour | Sand yellow |
| Available grit | P40-600 |
| Shapes | Discs, strips and rolls |
Datasheets(X)
Grains P40-P120
Initial sanding of factory primers on new parts (KTL paints), sanding off old paint, sanding out stone-chip damage and rusty areas, sanding dented areas down to bare metal, pre-sanding of polyester and fine filler, levelling of filler edges.
Grains P100-P500
Initial sanding of old paint during transition to new paint, matting of top-coat paints, sanding of plain paints, thermoplastic acrylic paints, clear lacquers, water-based paints, thick-film, primer, synthetic resin and nitro fillers, spray filler, 2-component and MS filling primers, and reaction primers.
Form | Roll |
Width x length | 115 mm x 50 m |
Grid size | 120 |
Backing material | C-weight paper |
Last viewed
Silicone fluid silicone spray
Pipe fastening clamp Multifix DIN 3016, form RSGU/D1, W5/EPDM
Circular saw blade, wood For cordless hand-held circular saw HKS 10-A/12-A
Collet chuck for flexible shaft
Knurled nuts, low type DIN/WN 467, steel 5, zinc plated, blue passivated (A2K)
Cover cap for base height adjuster
Wire cable 7 x 19 A4 stainless steel
Detergent and disinfectant DETCLOR
Manual drive-in stud with small collar
RW® bit