Vehicle battery charger WBC-15
Vehicle battery charger WBC 12/24 V – 15/10 A
CHRG-BTRY-VEH-(WBC-15)-15/10A-12/24V
Register now and access more than 125,000 products
Flexible application depending on the situation
- Selection of different charging modes - 12 V/24 V/supply/de-sulphation/cold
- Selection of different battery types - wet/AGM/EFB (start/stop)/lithium
Intelligent microprocessor charging technology
- Charges up to 3 times faster than conventional devices
- Charges deeply discharged batteries as low as 0.5 V residual voltage
Maximum safety
- Protection against overcharging, reverse polarity, voltage spikes, etc.
- Best temperature monitoring by means of sensor and ventilation system
- Charging stops automatically if risks are detected
Datasheets(X)
1. Red terminal on + pole, then black terminal on vehicle ground or - pole
2. Connect power cable to 230 V socket
3. First select charging mode, then battery type
4. Press the mode button for 3 seconds to interrupt or stop the charge
Min./max. input voltage | 240-220 V |
Frequency | 50 Hz |
Charging voltage max. at 12 V | 15.8 V |
Charging voltage max. at 24 V | 29.8 V |
Charging current at 12 V | 15 A |
Charging current at 24 V | 10 A |
Min./max. rechargeable battery/battery capacity | 40-230 Ah |
Power rating | 298 W |
Battery designation | 24 V lithium ion battery (LiFePO4) |
Charging characteristics | 8-step |
IP protection class | IP 20 |
Cable length | 150 cm |
Fully insulated charging terminals | Yes |
Length (battery charging cable with terminals) | 258 cm |
Cable cross section | 6 mm² |
Length x width x height | 206 x 153 x 69 mm |
Product weight (per item) | 1.700 kg |
Colour | Black grey |
Spark protection | Yes |
Reverse-polarity protection | Yes |
Approval mark | CE |
Last viewed
VDE heavy-duty side cutters DIN ISO 5749, IEC 60900
Pan head screw with H cross recess DIN 7985, A2 stainless steel, plain
AT 48 base
Fork joints with split pin DIN 71751, with cotter bolts, zinc-plated, blue passivated (A2K)
Nylon abrasive Fine A
Hexagonal bolt with shank ISO 4014, A4-50 and A4-70 stainless steel, plain
Fleece wrapping tape B2
Hexagon socket set screw with ring cutter ISO 4029, A4 stainless steel, 21H, plain
Castellated nut, low profile with fine thread DIN 937, steel 17H/22H, zinc-plated, blue passivated (A2K)
Hexagonal bolt with shank