VLB 200 3D door hinge
Door hinge VLB 200 3-D
RECESHNGE-VLB200-3D-HINGE-F1/SILVER
Register now and access more than 125,000 products
- The hinges are cut into the block/blind frame/wooden wrap-around frame/steel frame and the door and are not visible when the door is closed
- Can be adjusted in three directions without removing the door leaf
- The toothed clamping plates reliably prevent unwanted height adjustment
- Maintenance-free
To install the hinges, milling jigs, a milling cutter with dia. 16 mm (not in product range) and a stop ring with dia. 22 mm (not in product range) are required.
If the hinges are installed on wooden wrap-around frames, separate mounting plates are required.
Dimensions subject to change. Subject to technical changes!
Datasheets(X)
Suitable for fire and acoustic doors
Suitable for flush-closing building doors on wooden block, wooden wrap-around, steel and aluminium frames.
 | |
Suitable for | Flush wooden doors |
Material of housing | ALU/ST |
Colour | Silver F1 |
Surface | Lacquered |
DIN direction | DIN R/L |
Lateral adjustment | +/- 3 mm |
Height adjustment | +/- 3 mm |
Contact pressure adjustment | +/- 1 mm |
Integrated hinge side security | No |
Load capacity with 2 hinges | 200 kg |
Opening angle | 180 Degree |
Standards | EN 1935 |
Hinge class | 14 |
EC declaration of conformity (CE) | Yes |
Construction product | Yes |
Environmental Product Declaration | No |
Included in delivery | 2 x VLB 200 3-D hinges, 8 x special screws M5 x 13.5 mm, nickel-plated, TX20 (for mounting hinges on the mounting plate for wooden wrap-around frames) |
| Classification key according to DIN EN 1935: 2002, ETA-17/0328 | |||||||
| 4 | 7 | 7 | 1 EI30 (minimum) | 1 | 4 | 1 | 14 |
Last viewed
Rear door guide for Opel Movano, Renault Master and Nissan Interstar
Bond + Seal structural adhesive
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
Hexagonal bolt with shank
2-way blow-out gun With a control button for the infinitely variable adjustment of air flow
Countersunk head screw with recessed head, H DIN 965, steel 4.8, plain
Hose coupling hose piece
C 6.3 bit hexagon socket (1/4 inch) with patented POWERDRIV® drive
Extraction adapter
HSCo 90° green-ring countersink DIN 335C