VLB 100 3D IHV door hinge
Door hinge VLB 100 3-D IHV
RECESHNGE-VLB100-3D-IHA-VELOUR-(NP)
Register now and access more than 125,000 products
- Convenient operation and precise adjustment of the hinges
- The hinges are cut into the block/blind frame/wooden wrap-around frame/steel frame and the door and are not visible when the door is closed
- Can be adjusted in three directions without removing the door leaf
- Maintenance-free
To install the hinges, milling jigs, a milling cutter with dia. 24 mm (not in product range) and a stop ring with dia. 30 mm (not in product range) are required.
If the hinges are installed on wooden wrap-around frames, separate mounting plates are required.
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
Suitable for fire and acoustic doors
Suitable for flush-closing building doors on wooden block, wooden wrap-around, steel and aluminium frames.
 | |
Suitable for | Flush wooden doors |
Material of housing | ALU/ST |
Colour | Velour nickel coloured |
Surface | Lacquered |
DIN direction | DIN R/L |
Lateral adjustment | +/- 3 mm |
Height adjustment | +/- 3 mm |
Contact pressure adjustment | + 2 mm/- 1 mm |
Integrated hinge side security | No |
Load capacity with 2 hinges | 120 kg |
Opening angle | 180 Degree |
Standards | EN 1935 |
Hinge class | 13 |
EC declaration of conformity (CE) | Yes |
Construction product | Yes |
Environmental Product Declaration | No |
Included in delivery | 2 x VLB 100 3D IHV hinges, 8 x special screws M5 x 13.5 mm, nickel-plated, TX20 (for mounting the hinges on the mounting plate for wooden wrap-around frames) |
| Classification key in line with DIN EN 1935: 2002, ETA-08/0209 | |||||||
| 4 | 7 | 6 | 1 EI30 (minimum) | 1 | 3 | 1 | 13 |
| Milling-in ratios | ||
| Trimming, frame (X) | Trimming, blade (Y) | Distance (Z) |
| 4 mm | 4 mm | -1 mm |
| 5 mm | 4 mm | -2 mm |
| 6 mm | 4 mm | -3 mm |
| 7 mm | 4 mm | -4 mm |
| 5 mm | 5 mm | -1 mm |
| 6 mm | 5 mm | -2 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Twist drill bit HSS DIN 338 type RN 130°
Hard hat SH 2000-S
A9 BAS – Neutral Silicone
Strip For Circo unprinted number plate holder
Standard cable tie with plastic latch
Wood screw Hexagon head DIN 571, A2 stainless steel
Letter punches
Twist drill bit HSCO DIN 338 type RN
Screw cap for number plate screw
Cable box EASY With plastic lid or foam strips