VDE heavy-duty side cutters DIN ISO 5749, IEC 60900
VDE heavy-duty side cutters DIN ISO 5749 IEC 60900
HDUTSDCTR-VDE-L180MM
Register now and access more than 125,000 products
- For working on live parts up to 1000 volts (AC) and up to 1500 volts (DC), observing all prescribed safety precautions
- Strength-saving, clean cutting thanks to milled precision cutting edge
- High-quality tool steel ensures long service life and precision of blades, even under maximum loads
- Single-component handle with wide VDE collar for safe working
- Inductively hardened precision blades
- Surface entirely ground and chrome-plated
- Lap joint with forged-on axis
Datasheets(X)
Length (L) | 180 mm |
Length in inches (L) | 7 in |
Max. medium wire diameter cutting capacity | 3.8 mm |
Max. hard wire diameter cutting capacity | 2.7 mm |
Max. piano wire diameter cutting capacity | 2.2 mm |
Max. soft wire diameter cutting capacity | 4 mm |
EN standard | 60900 |
ISO | 5749 |
Material of handle | Plastic |
Surface | Chrome plated |
Last viewed
Pan head screw with H cross recess DIN 7985, A2 stainless steel, plain
AT 48 base
Fork joints with split pin DIN 71751, with cotter bolts, zinc-plated, blue passivated (A2K)
Nylon abrasive Fine A
Hexagonal bolt with shank ISO 4014, A4-50 and A4-70 stainless steel, plain
Fleece wrapping tape B2
Hexagon socket set screw with ring cutter ISO 4029, A4 stainless steel, 21H, plain
Castellated nut, low profile with fine thread DIN 937, steel 17H/22H, zinc-plated, blue passivated (A2K)
Hexagonal bolt with shank
FLEXEN® fleece protective hose B2 drain pipe