VARIFIX® Standardfix hammer head fastener Pre-assembled with nut and washer, A4 stainless steel
VARIFIX Standardfix T-head fastener A4
HAMHDFXNG-COMPLETE-A4-PRFL26/28-M8X50
Register now and access more than 125,000 products
Cradle to Cradle®-certified
- Upgrading the building using non-hazardous materials
- Wider range of applications for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB
Our products certified as Cradle to Cradle Certified® are resource-conserving and environmentally compatible. The standard assesses the safety, recyclability and pollutant content of materials in the final product. The focus here is on conserving resources, for example, by using recycled material in the manufacturing process.
Datasheets(X)
CAD data (available after login)
Recommended for direct fastening of pipe clamps
 | |
Suitable for mounting rail | 26 x 18 mm, 28 x 28 mm |
Nominal diameter (G) | 8 mm |
Length (hammer head and stud bolt) (LG) | 50 mm |
Washer diameter (d2) | 25 mm |
Length (L) | 22 mm |
Width (B) | 13 mm |
Thickness (t) | 4 mm |
Washer thickness (h1) | 1.5 mm |
Surface | Plain |
Material | Stainless steel A4 |
Weight | 34 g |
Thread type | Metric thread |
Sustainability | Resources, Pollutants / Emissions |
Last viewed
Pull handle ST/A200
ASSY®plus 4 P CSMR wooden plate screw Hardened zinc-plated steel partial thread with underhead thread countersunk head
C 6.3 PH bit (1/4 inch)
1/4 inch socket TX IPR
Metric combination wrench with POWERDRIV®
Quick-action chuck 1-sleeve
W-VIZ-A anchor rod, A4 stainless steel for W-VIZ/A4 injection systems (concrete)
Brass anchor
Warning tape, diagonal
Universal dispenser spacer