VAKU 90 glass fibre mat
Fibreglass mat VAKU 90
FBRGLSMAT-(VAKU-90)-1SM
Register now and access more than 125,000 products
- High-quality reinforcing material for application with VAKU 80 repair resin
- Soaking in repair resin VAKU 80 allows the fibreglass mat to be draped easily into the desired form
- The material is soft and easy to form, making it perfect for reconstructing existing forms
- This restores the original strength
Cut the fibreglass mat 2 cm wider than the area to be repaired When repairing bodywork panels, always apply Rust Stop primer. When laminating in conjunction with VAKU 90 glass fibre mat, ensure bubble-free application. Apply VAKU 80 wet-on-wet in several steps.
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!
For larger holes or cracks in GFRP parts, such as bumpers For rust holes and cavities in bodywork panels
- Auto/cargo: In vehicle, boat, bodywork and chassis construction for repairing breakage points. For repairing GFRP parts and for restoring shape and stability.
- Metal: Can be used in the metal industry for repairing and restoring GFRP parts and for prototype construction and boat building.
- Wood: do not use!
The surface must be clean, dry and free from grease. Prepare the affected area with coarse sandpaper. Tear the fibreglass into shape. Tearing levels the transition between multiple layers. Paint the area being repaired with VAKU 80 repair resin, apply the fibreglass and soak with VAKU 80 repair resin.
Hardener content | 2 % |
Chemical basis | Fibre glass |
Colour | White |
Width | 80 cm |
Coating weight per m² | 300 g |
Included in delivery | 1m² fibreglass mat |
Min./max. working life | 10-15 min |
Conditions for working life | at 20°C |
Min. drying time | 60 min |
Conditions for drying time | at 20°C |
Max. temperature resistance of the hardened material | 80 °C |
Shelf life from production | 0 Month |
Datasheets(X)
Last viewed
Conical countersink HSCo 90° with cross hole
Long 90° elbow with male thread EN10242 G8, hot-dip galvanised malleable iron
Wall-mounted roll holder For cleaning paper rolls with waste bag holder
Electromagnetic hold-open device, double-leaf door With GTS 640 and integrated smoke detector
Wire end ferrule with plastic sleeve
Hard-pressed compact fleece disc With fabric plate
Washer with large outside diameter DIN 9021 (with large outside diameter), steel, zinc-plated, blue passivated (A2K)
Plumber's sealing screw, A2 stainless steel
Drilling jig For Fixograss 9000 shelf support
Face wrench
