Universal rafter-to-purlin anchor - PURLINANC-UNI-H250MM

Universal rafter-to-purlin anchor - PURLINANC-UNI-H250MM - 1

Universal rafter-to-purlin anchor - PURLINANC-UNI-H250MM - 2

Universal rafter-to-purlin anchor

Name: Universal rafter-to-purlin anchor
Brand: Würth
SKU: 0681250010

Rafter support anchor universal
PURLINANC-UNI-H250MM

Art.-no. 0681250010

EAN 4024835585491

All versions

Similar products

Prices for customers after login

Universal rafter-to-purlin anchor

Art.-no. 0681250010

Prices for customers after login

Quantity

x 50 pcs

Exclusively for trade customers

Login/Register
Call customer service: +34928189825

Tensile anchorage of intersecting timbers in concealed areas (e.g. rafter bracing, collar beam suspension)

Horizontal forces can be absorbed

2 or 4 rafter-to-purlin connectors must be used per joint, depending on the load

2 rafter-to-purlin connectors per joint must be arranged diagonally opposite one another to ensure central load application

Universal, i.e. right or left application

Sheet metal hot-dip galvanised on both sides (S250GD + Z275 [approx. 20 µm]), thickness 2.0 mm in line with EN 10346:2009

Application in utilisation classes 1 and 2 in line with EN 1995:2013

Proof of Performance

European Technical Approval ETA-14/0105

Notice

The transverse load of the connected timbers must be observed and verified where necessary. Transverse reinforcement can be added using ASSY plus FT full-thread screws.

Application area

European Technical Approval ETA-14/0105

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Rafter-to-purlin connectors are used in timber structures, for instance, to secure battens, absorb wind suction forces, suspend collar beams or as anti-twist protection for beams in load-bearing connections.

Instructions

Approved fasteners:

Comb/ribbed nail in line with EN 14592: 4.0 x 40 mm


Width x height x depth	35 x 250 x 35 mm
Thickness	2 mm
Design	Type - universal
Hole diameter in subcarrier nJ/main carrier nH	5 / 5 mm
Number of holes in subcarrier nJ + main carrier nH	8 + 9 PCS
Weight	122 g
Material	Steel
Surface	Hot dip galvanized
Approval	ETA-14/0105
Depth	35 mm
Material designation	S250GD

Height mm	2 rafter-to-purlin anchors per connection (diagonal) Wood width min. 60 mm			4 rafter anchors per connection Wood width min. 80 mm
Height mm	Ring-shank nails	Number of nails/connection	Max. F1	Ring-shank nails	Number of nails/connection	Max. F1
170	4.0 x 40	4 x 4 = 16	3,4	4.0 x 40	8 x 4 = 32	6,8
210		4 x 6 = 24	4,6		8 x 6 = 48	9,2
250		4 x 8 = 32	5,6		8 x 8 = 64	11,2
In load case HZ, the table values may be increased by 25 %.

Load capacity tables for Würth rafter-to-purlin anchor universal
Characteristic load-bearing capacities in kN for two rafter-to-purlin anchors per connection
Art. no.	Format (mm)	Ring-shank nails Number of pieces	Characteristic load-bearing capacity F₁
			Ring-shank nails 4x40 mm	Steel
0681 170 010	35x170x35	4 + 5	12.30 kN	6.62 kN
0681 210 010	35x210x35	6 + 7	18.90 kN	6.62 kN
0681 250 010	35x250x35	8 + 9	25.40 kN	6.62 kN
When nailing the rafter-to-purlin anchor, the edge distance between the nails and the stressed edge must be according to EN 1995: 2010. If necessary, lateral tensile failure should be configured for both components in accordance with the general rules of EN 1995:2004. In this case, the design value of the acting force perpendicular to the grain direction must be less than the design value resistance F_90,Rd F_90,Rk = character. Tensile strength in N
Notes: Design according to ETA-014/0105 and EN 1995-1-1:2004 The regulations and instructions of ETA-14/0105 must be observed The values given apply to solid wood with a raw density of Rk=350 kg/m³

Required accessory:

Product

Description

Quantity

Price
/PU

Comb nail / anchor nail

RIDGNL-(A3K)-4X75MM

Art.-no. 0681940075

Galvanised steel, blue coated (A2K)

x 250 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).