Universal floor cleaner

Area of application

For the removal of old gloss and wax films and stubborn dirt.

Properties

• pH value: alkaline (approx. 12 in concentrate/approx. 10 with 1% dilution)


• Prolongs the service life of appliances by preventing calcium deposits

Dosage

• Use a dilution of 1:5 to 1:10, depending on the age and strength of the film


• Also suitable for in-between cleaning and ongoing cleaning of floors such as rubber grip floors. Use a dose of 1:10 to 1:25 for these applications

Usage

10 l is sufficient for thorough cleaning of 100 m²

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing conditions. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and carry out further development.