Universal adapter For cooling system tester
Univ. adap., cool. sy. test. 27–42 mm
UNIADAPT-F.CLSYSTEST-085350
Register now and access more than 125,000 products
Datasheets(X)
1. Adapter rubber and opening to be sealed must be free of oil, grease and glycol residues
2. Press the adapter into the radiator opening or expansion tank and seal by rotating the two adjustment wheels against one another
3. Connect radiator tester
4. Pump approx. 1.3 bar into the cooling system using the hand pump
5. The pressure in the cooling circuit must not drop by more than 0.2 bar within 10 minutes.
6. In the event of a drop in pressure, localise and eliminate potential points of leakage (e.g. water pump, hoses, cylinder head seal)
Caution: The universal adapter should never be immersed in cooling fluid as this causes fluid leakage at the valve when the pressure is released.
Last viewed
Allen key
Spring For slate cutters
3/8" cardan joint insert short
Application nozzle Standard For 310 ml plastic cartridges
L-shaped P5 quick-action connector
Hand tap, second tap HSS DIN 352
Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032
Power spray glue plus
Bodywork file blade
Nylon Sanding Fleece Disc For wheel hub grinders