Universal adapter For cooling system tester
Univ. adap., cool. sy. test. 19.5-38 mm
UNIADAPT-F.CLSYSTEST-085350-SML
Register now and access more than 125,000 products
Datasheets(X)
Particularly for Japanese vehicles
1. Adapter rubber and opening to be sealed must be free of oil, grease and glycol residues
2. Press the adapter into the radiator opening or expansion tank and seal by rotating the two adjustment wheels against one another
3. Connect radiator tester
4. Pump approx. 1.3 bar into the cooling system using the hand pump
5. The pressure in the cooling circuit must not drop by more than 0.2 bar within 10 minutes.
6. In the event of a drop in pressure, localise and eliminate potential points of leakage (e.g. water pump, hoses, cylinder head seal)
Caution: The universal adapter should never be immersed in cooling fluid as this causes fluid leakage at the valve when the pressure is released.
Last viewed
Bevel brush Knotted stainless steel with M14 connecting thread
Perforated sleeve WIT-SH WIT-SH for ALLROUNDER WIT-VM 250 injection systems
Centre drill Tungsten carbide
Dovetail milling cutter for wood With chink cutter
Sheet metal nut closed screw-in area
Caracas S1P low-cut safety shoes
Holder For small abrasives
Thread mandrel With nozzle
Combi hexagon tapping screw with captive washer
Retaining jaws Adjustable for wire stripping pliers