Unit transport castor with rotating holder and locking brake
Industrial swivel castor with locking device
INDUSTSWIVCSTR-LOK-SCRONPLT-D150-250KG
Register now and access more than 125,000 products
- Friction bearing hub
- Strength: 80±4 Shore A
- Wheels made from injection-moulded TPU 80A polyurethane
- Excellent sliding properties and elasticity, low roll resistance
- Good noise and vibration-damping properties
- Good resistance to wear and tear, high service life
- Electrolytically galvanised sheet steel housing
- Double ball collar with grease lubrication
- Dust protection ring
- Application temperature: -10°C to +70°C
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
Suitable for environments influenced by the weather, alcohols and glycols, weak organic and mineral acids and water. For use in workshops, in the chemicals industry, in equipment construction, the textile industry and for all types of technical devices.
 | |
Roll diameter (D) | 150 mm |
Roll width (L) | 45 mm |
Height (H) | 194 mm |
Load capacity | 250 kg |
Length (A) | 140 mm |
Width (B) | 110 mm |
Hole distance (a) | 105 mm |
Hole distance 2 (b) | 80 mm |
Elongated hole diameter (c) | 11 mm |
Min./max. shore A hardness | 57-63 |
Min. temperature conditions | -15 °C |
Max. temperature conditions | 80 °C |
Bolt hole depth (R) | 56 mm |
Last viewed
Gas filter ABEK1 For breathing protection series 175
Nozzle and needle kit ADVANCE W18
Wall chaser MSF 180N
1/4 inch socket wrench insert, metric short
Hammer drill bit Max Quadro-L Vario
Vacuum brake bleeder set, 18 pcs
Vulcanising cement
Metric ratchet combination wrench Flexible ratchet head with POWERDRIV®
1/2-inch T-handle
Nylon abrasive pad Plus