Unit transport castor with rotating holder and locking brake
Industrial swivel castor with locking device
INDUSTSWIVCSTR-LOK-SCRONPLT-D125-180KG
Register now and access more than 125,000 products
- Friction bearing hub
- Strength: 80±4 Shore A
- Wheels made from injection-moulded TPU 80A polyurethane
- Excellent sliding properties and elasticity, low roll resistance
- Good noise and vibration-damping properties
- Good resistance to wear and tear, high service life
- Electrolytically galvanised sheet steel housing
- Double ball collar with grease lubrication
- Dust protection ring
- Application temperature: -10°C to +70°C
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
Suitable for environments influenced by the weather, alcohols and glycols, weak organic and mineral acids and water. For use in workshops, in the chemicals industry, in equipment construction, the textile industry and for all types of technical devices.
 | |
Roll diameter (D) | 125 mm |
Roll width (L) | 35 mm |
Height (H) | 156 mm |
Load capacity | 180 kg |
Length (A) | 100 mm |
Width (B) | 85 mm |
Hole distance (a) | 80 mm |
Hole distance 2 (b) | 60 mm |
Elongated hole diameter (c) | 9 mm |
Min./max. shore A hardness | 57-63 |
Min. temperature conditions | -15 °C |
Max. temperature conditions | 80 °C |
Bolt hole depth (R) | 37 mm |
Last viewed
Twist drill bit HSS DIN 1869 R2 type RN
Hexagon nut ISO 4032, steel 5-2, plain, for pressure container construction
Rosette lever/handle set Rounded
Manual drive-in stud With small collar
Metric combination wrench with POWERDRIV®
HSCo 90° green-ring countersink DIN 335C
Spacer washer
Thread-rolling screw
C 6.3 screw hook bit (1/4 inch) Hexagon drive
ASSY® 4 A2 CS fittings screw A2 stainless steel plain full thread countersunk head