Unit transport castor with rotating holder and locking brake
Industrial swivel castor w/ locking device PA-core
INDUSTSWIVCSTR-LOK-PA-SCRONPL-D100-170KG
Register now and access more than 125,000 products
- Friction bearing hub
- Strength: 60±3 Shore D
- Excellent sliding properties and elasticity, low roll resistance
- Good wear and tearing resistance, high service life
- Application temperature: -15°C to +80°C
- Electrolytically galvanised sheet steel housing
- Double ball collar with grease lubrication
- Dust protection ring
- Suitable for a variety of flooring
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
Suitable for environments influenced by the weather, alcohols and glycols, weak organic and mineral acids and water. These castors are suitable for the textile and chemicals industry, for tanneries and for hotels and hospitals.
 | |
Roll diameter (D) | 100 mm |
Roll width (L) | 30 mm |
Height (H) | 128 mm |
Load capacity | 170 kg |
Length (A) | 100 mm |
Width (B) | 85 mm |
Hole distance (a) | 80 mm |
Hole distance 2 (b) | 60 mm |
Elongated hole diameter (c) | 9 mm |
Min./max. shore A hardness | 57-63 |
Min. temperature conditions | -15 °C |
Max. temperature conditions | 80 °C |
Bolt hole depth (R) | 35 mm |
Last viewed
Door holder, type D
Wire nail DIN 1151, steel, plain
Hexagon head sealing plug with collar DIN 910, A4 stainless steel, plain
Hexalobular-type cheese head screw, low head
Metric double box-end wrench with POWERDRIV®
pias® drilling screw, flat head with AW drive
Steel nail with riveted washer and discontinuous longitudinal corrugation
Serrated locking nut A2 stainless steel, plain
Slotted round head screw W-0231, steel 4.8, zinc-plated, with slot
Hexagonal nut ISO 4032 steel 6/8, zinc-plated blue passivated (A2K)