Unit transport castor with fixed holder
Industrial fixed castor
INDUSTFIXCSTR-SCRONPLT-D150-250KG
Register now and access more than 125,000 products
- Friction bearing hub
- Strength: 80±4 Shore A
- Wheels made from injection-moulded TPU 80A polyurethane
- Excellent sliding properties and elasticity, low roll resistance
- Good noise and vibration-damping properties
- Good resistance to wear and tear, high service life
- Electrolytically galvanised sheet steel housing
- Double ball collar with grease lubrication
- Dust protection ring
- Application temperature: -10°C to +70°C
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
Suitable for environments influenced by the weather, alcohols and glycols, weak organic and mineral acids and water. For use in workshops, in the chemicals industry, in equipment construction, the textile industry and for all types of technical devices.
 | |
Roll diameter (D) | 150 mm |
Roll width (L) | 45 mm |
Height (H) | 194 mm |
Load capacity | 250 kg |
Length (A) | 140 mm |
Width (B) | 110 mm |
Hole distance (a) | 105 mm |
Hole distance 2 (b) | 80 mm |
Elongated hole diameter (c) | 11 mm |
Min./max. shore A hardness | 57-63 |
Min. temperature conditions | -15 °C |
Max. temperature conditions | 80 °C |
Last viewed
Pan head screw with H cross recess DIN 7985, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt with thread up to the head DIN 933, A2 80 stainless steel, plain
Packing tape dispenser
Stainless steel base
Timing tool set 9 pieces, for Opel 2.0 CDTI, diesel
Car zinc adhesive weight From the original equipment for VW, Opel and Volvo
Tavinea Sorto Vionaro traverse
Sharpening stone For diamond cutting discs, cup wheels and core drill bits (excl. PCD)
Terminal For cross-earther
Slotted flat-head screw DIN 85, steel 4.8, plain