Union nipple
Socket union brass
SKTUN-BRS-DN16-AG-G3/4IN
Register now and access more than 125,000 products
- Direct connection to a female thread, eliminating double nipples
- Only one screw connection per joint, resulting in greater safety and saving of a union nut and a seal
Datasheets(X)
For the connection of two stainless steel corrugated pipes
For connection to a female thread
Mounting is the same as for a union nut, i.e. slide a union nipple over the pipe, compress the pipe, place a gasket in-between and screw in.
 | |
Material | Brass |
Connection thread | ET G 3/4 inch |
DN nominal width | DN 16 |
Internal diameter | 20.5 mm |
Width across flats (SW) | 27 mm |
Length | 21 mm |
Last viewed
Wire end ferrule with plastic sleeve
Metric double open-end wrench DIN 3110/ISO 1085
Swivel castor with brake For workshop trolleys
Rivet nut with a small countersunk head and knurled shank
3/4-inch impact socket wrench insert hexagon, metric, short
Universal connection piece for dust extraction
Comfort breathing mask - folded 3M Aura 9300+
Bond + Seal structural adhesive
1/4 inch socket wrench insert, metric short
Disposable gloves nitrile Powder-free, black