Tyre pressure monitoring system EZ-Sensor® 2.0 with aluminium valve, variable
Tyre pressure control sys SP sensor 2.0 alum var
SENSO-UNI-TYRPRES-EZ-2.0-CLMP-IN-0-40DGR


Register now and access more than 125,000 products
Reduced procurement cost and optimised storage
Supports the position-dependent pressure value display in the vehicle
Fully compatible with the latest OE sensor position determination
Fulfils OEM requirements
Developed according to the quality and function standards of original equipment manufacturers
Developed and tested for the majority of aluminium and steel rims from OEMs and aftermarket
Suitable for the most common steel and light alloy wheel rims
The electronic ID of the original sensor can be copied to the EZ-Sensor using an iQ 50
- No need to recalibrate the vehicle when using complete wheels (winter tyre set)
- Huge time savings
Sensor can be programmed as often as required
- High degree of flexibility
- Wireless programming of pre-assembled wheels using iQ 50 enables "neutral" setup of complete wheels.
Each time a tyre is changed, always use a new rubber valve, valve core and screw, and adhere to the specified tightening torques.
Works with the WOW! iQ 50 programming and diagnostics tool.
Datasheets(X)
For use on class M1 vehicles (cars) with built-in tyre pressure monitoring system
Material of valve | Aluminium |
Min. valve angle | 0 Degree |
Max. valve angle | 40 Degree |
Transmission frequency | 433.92 MHz |
Max. speed | 300 km/h |
Tightening torque – union nut according to manufacturer's specifications incl. tolerance | 8 Nm |
Tightening torque – screw according to manufacturer's specifications incl. tolerance | 0 Nm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!