Twist drill bit assortment HSCo DIN 338 Type RN MFD VARIO 19 pieces
Tw. drill bit HSCo DIN 338 MFD VARIO 19 pcs Syska
DRL-MET-SET-DIN338-HSCO-MFDV-(D1-10)-0,5
ZEBRA
Art.-no.
0626050019
EAN 4065233072022
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
Premium all-rounder for use in stationary machines for high-precision machining of almost all materials, such as stainless steel, heat-resistant steels and titanium and for general applications in conventional steel up to 1,400 N/mm² as well as in cast iron and non-ferrous metals (e.g. magnesium alloys, brass, bronze, plastic). Available in the ORSY® system cassette.
Low friction and fast chip removal
Exclusive Vario helix
Optimal centring properties and maximum speed
Special design with four cutting edges with optimised point thinning
Optimal guiding properties and precision (extremely high torsional rigidity)
Combination of double drill heel and single drill heel
Up to nine-times longer service life compared to uncoated drill bits and up to two-times longer service life compared to conventional coatings (heat-resistant up to 800 °C)
Special magma multi-layer coating
Compact and practical system cassette suitable for the ORSY® system with useful features such as stackability, optimised joint and easy opening
Available exclusively from Würth
Product information
Datasheets (0)
Certificates/ Documents (0)
Twist drill bit assortment HSCo DIN 338 Type RN MFD VARIO 19 pieces including:
1
x
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
DRL-TWST-MET-DIN338-HSCO-MFDV-D1,0
ZEBRA
Description:
1.0 mm
Premium all-rounder for use in stationary machines for high-precision machining of almost all materials, such as stainless steel, heat-resistant steels and titanium and for general applications in conventional steel up to 1,400 N/mm² as well as in cast iron and non-ferrous metals (e.g. magnesium alloys, brass, bronze, plastic).
Quantity:
1
x
1
x
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
DRL-TWST-MET-DIN338-HSCO-MFDV-D1,5
ZEBRA
Description:
1.5 mm
Premium all-rounder for use in stationary machines for high-precision machining of almost all materials, such as stainless steel, heat-resistant steels and titanium and for general applications in conventional steel up to 1,400 N/mm² as well as in cast iron and non-ferrous metals (e.g. magnesium alloys, brass, bronze, plastic).
Quantity:
1
x
1
x
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
DRL-TWST-MET-DIN338-HSCO-MFDV-D2,0
ZEBRA
Description:
2.0 mm
Premium all-rounder for use in stationary machines for high-precision machining of almost all materials, such as stainless steel, heat-resistant steels and titanium and for general applications in conventional steel up to 1,400 N/mm² as well as in cast iron and non-ferrous metals (e.g. magnesium alloys, brass, bronze, plastic).
Quantity:
1
x
1
x
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
DRL-TWST-MET-DIN338-HSCO-MFDV-D2,5
ZEBRA
Description:
2.5 mm
Premium all-rounder for use in stationary machines for high-precision machining of almost all materials, such as stainless steel, heat-resistant steels and titanium and for general applications in conventional steel up to 1,400 N/mm² as well as in cast iron and non-ferrous metals (e.g. magnesium alloys, brass, bronze, plastic).
Quantity:
1
x
1
x
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
DRL-TWST-MET-DIN338-HSCO-MFDV-D3,0
ZEBRA
Description:
3.0 mm
Premium all-rounder for use in stationary machines for high-precision machining of almost all materials, such as stainless steel, heat-resistant steels and titanium and for general applications in conventional steel up to 1,400 N/mm² as well as in cast iron and non-ferrous metals (e.g. magnesium alloys, brass, bronze, plastic).
Quantity:
1
x
1
x
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
DRL-TWST-MET-DIN338-HSCO-MFDV-D3,5
ZEBRA
Description:
3.5 mm
Premium all-rounder for use in stationary machines for high-precision machining of almost all materials, such as stainless steel, heat-resistant steels and titanium and for general applications in conventional steel up to 1,400 N/mm² as well as in cast iron and non-ferrous metals (e.g. magnesium alloys, brass, bronze, plastic).
Quantity:
1
x
1
x
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
DRL-TWST-MET-DIN338-HSCO-MFDV-D4,0
ZEBRA
Description:
4.0 mm
Premium all-rounder for use in stationary machines for high-precision machining of almost all materials, such as stainless steel, heat-resistant steels and titanium and for general applications in conventional steel up to 1,400 N/mm² as well as in cast iron and non-ferrous metals (e.g. magnesium alloys, brass, bronze, plastic).
Quantity:
1
x
1
x
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
DRL-TWST-MET-DIN338-HSCO-MFDV-D4,5
ZEBRA
Description:
4.5 mm
Premium all-rounder for use in stationary machines for high-precision machining of almost all materials, such as stainless steel, heat-resistant steels and titanium and for general applications in conventional steel up to 1,400 N/mm² as well as in cast iron and non-ferrous metals (e.g. magnesium alloys, brass, bronze, plastic).
Quantity:
1
x
1
x
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
DRL-TWST-MET-DIN338-HSCO-MFDV-D5,0
ZEBRA
Description:
5.0 mm
Premium all-rounder for use in stationary machines for high-precision machining of almost all materials, such as stainless steel, heat-resistant steels and titanium and for general applications in conventional steel up to 1,400 N/mm² as well as in cast iron and non-ferrous metals (e.g. magnesium alloys, brass, bronze, plastic).
Quantity:
1
x
1
x
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
DRL-TWST-MET-DIN338-HSCO-MFDV-D5,5
ZEBRA
Description:
5.5 mm
Premium all-rounder for use in stationary machines for high-precision machining of almost all materials, such as stainless steel, heat-resistant steels and titanium and for general applications in conventional steel up to 1,400 N/mm² as well as in cast iron and non-ferrous metals (e.g. magnesium alloys, brass, bronze, plastic).
Quantity:
1
x
1
x
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
DRL-TWST-MET-DIN338-HSCO-MFDV-D6,0
ZEBRA
Description:
6.0 mm
Premium all-rounder for use in stationary machines for high-precision machining of almost all materials, such as stainless steel, heat-resistant steels and titanium and for general applications in conventional steel up to 1,400 N/mm² as well as in cast iron and non-ferrous metals (e.g. magnesium alloys, brass, bronze, plastic).
Quantity:
1
x
1
x
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
DRL-TWST-MET-DIN338-HSCO-MFDV-D6,5
ZEBRA
Description:
6.5 mm
Premium all-rounder for use in stationary machines for high-precision machining of almost all materials, such as stainless steel, heat-resistant steels and titanium and for general applications in conventional steel up to 1,400 N/mm² as well as in cast iron and non-ferrous metals (e.g. magnesium alloys, brass, bronze, plastic).
Quantity:
1
x
1
x
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
DRL-TWST-MET-DIN338-HSCO-MFDV-D7,0
ZEBRA
Description:
7.0 mm
Premium all-rounder for use in stationary machines for high-precision machining of almost all materials, such as stainless steel, heat-resistant steels and titanium and for general applications in conventional steel up to 1,400 N/mm² as well as in cast iron and non-ferrous metals (e.g. magnesium alloys, brass, bronze, plastic).
Quantity:
1
x
1
x
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
DRL-TWST-MET-DIN338-HSCO-MFDV-D7,5
ZEBRA
Description:
7.5 mm
Premium all-rounder for use in stationary machines for high-precision machining of almost all materials, such as stainless steel, heat-resistant steels and titanium and for general applications in conventional steel up to 1,400 N/mm² as well as in cast iron and non-ferrous metals (e.g. magnesium alloys, brass, bronze, plastic).
Quantity:
1
x
1
x
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
DRL-TWST-MET-DIN338-HSCO-MFDV-D8,0
ZEBRA
Description:
8.0 mm
Premium all-rounder for use in stationary machines for high-precision machining of almost all materials, such as stainless steel, heat-resistant steels and titanium and for general applications in conventional steel up to 1,400 N/mm² as well as in cast iron and non-ferrous metals (e.g. magnesium alloys, brass, bronze, plastic).
Quantity:
1
x
1
x
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
DRL-TWST-MET-DIN338-HSCO-MFDV-D8,5
ZEBRA
Description:
8.5 mm
Premium all-rounder for use in stationary machines for high-precision machining of almost all materials, such as stainless steel, heat-resistant steels and titanium and for general applications in conventional steel up to 1,400 N/mm² as well as in cast iron and non-ferrous metals (e.g. magnesium alloys, brass, bronze, plastic).
Quantity:
1
x
1
x
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
DRL-TWST-MET-DIN338-HSCO-MFDV-D9,0
ZEBRA
Description:
9.0 mm
Premium all-rounder for use in stationary machines for high-precision machining of almost all materials, such as stainless steel, heat-resistant steels and titanium and for general applications in conventional steel up to 1,400 N/mm² as well as in cast iron and non-ferrous metals (e.g. magnesium alloys, brass, bronze, plastic).
Quantity:
1
x
1
x
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
DRL-TWST-MET-DIN338-HSCO-MFDV-D9,5
ZEBRA
Description:
9.5 mm
Premium all-rounder for use in stationary machines for high-precision machining of almost all materials, such as stainless steel, heat-resistant steels and titanium and for general applications in conventional steel up to 1,400 N/mm² as well as in cast iron and non-ferrous metals (e.g. magnesium alloys, brass, bronze, plastic).
Quantity:
1
x
1
x
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
DRL-TWST-MET-DIN338-HSCO-MFDV-D10,0
ZEBRA
Description:
10.0 mm
Premium all-rounder for use in stationary machines for high-precision machining of almost all materials, such as stainless steel, heat-resistant steels and titanium and for general applications in conventional steel up to 1,400 N/mm² as well as in cast iron and non-ferrous metals (e.g. magnesium alloys, brass, bronze, plastic).
Quantity:
1
x
1
x
Description:
Compact empty box for DIN 338 twist drill bits, compatible with the ORSY® system
Quantity:
1
x
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.
Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2
Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)
Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)
Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2
Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)
Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)
Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.
Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.
Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Pan head tapping screw, C shape with H recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), shape C, with tip
Raised countersunk head screw with H recessed head DIN 966, A2 stainless steel, plain
Wiggle wire
ZD Nuevo door handle, escutcheon fitting
1-ear clamp with insert ring
Wheel hub grinder type A
360° Pump spray bottle
Aluminium airline lashing rail with flange
Dust cassette For random orbital disc sander ETS 125-E and ETS 150-E twin
Cellular rubber strip
