Turnbuckle sleeve produced from steel tube DIN 1478 (made from steel tube), steel L235 (S235JR), hot-dip galvanised (hdg) - TURNBCKLNUT-DIN1478-L235JR-CE-HDG-M30

Turnbuckle sleeve produced from steel tube DIN 1478 (made from steel tube), steel L235 (S235JR), hot-dip galvanised (hdg)

Name: Turnbuckle sleeve produced from steel tube DIN 1478 (made from steel tube), steel L235 (S235JR), hot-dip galvanised (hdg)
Brand: Würth
SKU: 0521000530

DIN/WN 1478 steel L235 hot dip galvanized CE
TURNBCKLNUT-DIN1478-L235JR-CE-HDG-M30

Art.-no. 0521000530

EAN 4061975085849

All versions

Specification

Notice

M27 not standardised according to DIN 1478.

Turnbuckle sleeves in accordance with DIN 1478 must be assembled with weld-on ends in accordance with DIN 34828 from the same material (S235JR). In this case, the load capacity of the turnbuckle sleeves is always greater than that of the weld-on ends. When assembled with connecting parts made from other materials - especially materials with a higher tensile strength - the load capacity of the turnbuckle sleeves must be checked separately.

Application

Application area

Wind, stabilisation and cross bracing in steel and wooden constructions

Technical information


Standards	DIN 1478
Material	Steel
Surface	Hot dip galvanized
RoHS-compliant	Yes
Thread type x nominal diameter (D)	M30
Turnbuckle-sleeve width (external) (d₁)	51 mm
Outer diameter of sleeve end (d₂)	38 mm
Turnbuckle-sleeve length (l₁)	255 mm
Thread length (metric thread) (m₁)	36 mm
Adjustability	160 mm
Permissible load	120 kN

Documents

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Accessory

Required accessory:

Product

Description

Quantity

Price
/PU

Welding studs DIN 34828, steel S235JR, hot-dip galvanised (hdg), for turnbuckles

WELDONEND-DIN34828-S235JR-CE-HDG-M30

Art.-no. 0521000730

x 1 pcs

Welding studs DIN 34828, steel S235JR, plain, for turnbuckles

WELDONEND-DIN34828-S235JR-CE-M30

Art.-no. 0521000830

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).