Turnbuckle sleeve, open form DIN 1480 (open shape), A4 stainless steel
DIN 1480 bare stainless steel A4
TURNBCKLNUT-DIN1480-A4-M16
Register now and access more than 125,000 products
Turnbuckle sleeves in accordance with DIN 1480 must be assembled with weld-on ends in accordance with DIN 34828 in the same material (A4-50). In this case, the load capacity of the turnbuckle sleeves is always greater than that of the weld-on ends. When assembled with connecting parts made from other materials—especially materials with a higher tensile strength—the load capacity of the turnbuckle sleeves must be checked separately.
Datasheets(X)
Wind and stabilisation braces in steel construction
Standards | DIN 1480 |
Material | Stainless steel A4 |
Surface | Plain |
Form | Open |
RoHS-compliant | Yes |
Thread type x nominal diameter (D) | M16 |
Turnbuckle-sleeve width (external) (d1) | 42 mm |
Outer diameter of sleeve end (d2) | 27 mm |
Turnbuckle-sleeve length (l1) | 170 mm |
Thread length (metric thread) (m1) | 27 mm |
Adjustability | 110 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!