Turnbuckle, open form with welded ends DIN 1480, steel, zinc-plated, blue passivated (A2K)
DIN 1480 steel zinc plated with welding ends
TURNBCKL-WELDONEND-DIN1480-(A2K)-M8
Register now and access more than 125,000 products
Turnbuckle sleeves in accordance with DIN 1480 must be assembled with weld-on ends in accordance with DIN 34828 from the same material (S235JR). In this case, the load capacity of the turnbuckle sleeves is always greater than that of the weld-on ends. When assembled with connecting parts made from other materials—especially materials with a higher tensile strength—the load capacity of the turnbuckle sleeves must be checked separately.
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter (d) | M8 |
Turnbuckle-sleeve length (l) | 110 mm |
Turnbuckle-sleeve width (external) | 23 mm |
Outer diameter of sleeve end | 15 mm |
Turnbuckle-sleeve width (internal) | 11 mm |
Turnbuckle-sleeve diameter | 8 mm |
Length (of welding end) | 120 mm |
Thread length (metric thread) | 65 mm |
Standards | DIN 1480 |
Form | Open |
Design | With welding ends |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Last viewed
Safety glasses UB ONE
Lock for HDPE service case
Wood screw Hexagon head DIN 571, steel hot-dip galvanised
Bit assortment 47 pieces
1/4 inch socket wrenches Assortment of 33 pieces
Spare spring for secateurs
Flat folding filter, coated For ISS series
Ear defenders
Metric ratchet combination wrench with ratchet function on both the box and open ends
Twist drill bit HSS DIN 338 type RN 118°