Turnbuckle, open form with welded ends DIN 1480, steel, zinc-plated, blue passivated (A2K)
DIN 1480 steel zinc plated with welding ends
TURNBCKL-WELDONEND-DIN1480-(A2K)-M16
Register now and access more than 125,000 products
Turnbuckle sleeves in accordance with DIN 1480 must be assembled with weld-on ends in accordance with DIN 34828 from the same material (S235JR). In this case, the load capacity of the turnbuckle sleeves is always greater than that of the weld-on ends. When assembled with connecting parts made from other materials—especially materials with a higher tensile strength—the load capacity of the turnbuckle sleeves must be checked separately.
Datasheets(X)
CAD data (available after login)
Last viewed
Fixanchor W-FAZ/S
RW® bit
1/2-inch T-handle
Twist drill bit HSS DIN 338 type RN 130°
Safety screw A2 stainless steel, plain, wood screw thread
Metric double open-end wrench DIN 3110/ISO 1085
Crimp cable lug, push connector PVC-insulated
Aluminium telescopic ladder with folding section
Wire cable 7 x 19 A4 stainless steel
Slotted flat-head screws with shoulder Shape B - with undercut