Turnbuckle closed form with welding ends
DIN 1478 plain steel, closed shape w. weld-on end
TURNBCKL-CLSD-WELDONEND-1478-M30
Register now and access more than 125,000 products
Turnbuckle sleeves in accordance with DIN 1478 must be assembled with weld-on ends in accordance with DIN 34828 from the same material (S235JR). In this case, the load capacity of the turnbuckle sleeves is always greater than that of the weld-on ends. When assembled with connecting parts made from other materials—especially materials with a higher tensile strength—the load capacity of the turnbuckle sleeves must be checked separately.
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter (d1) | M30 |
Diameter (d2) | 38 mm |
Diameter 3 (d3) | 51 mm |
Diameter 2 (d4) | 16 mm |
Length (l1) | 255 mm |
Length (of welding end) (l2) | 260 mm |
Standards | DIN 1478 |
Material | Steel |
Surface | Plain |
RoHS-compliant | Yes |
Last viewed
Drilling jig For door handles and security escutcheons with CK punch or cylinder cover
Gas filter A2 For breathing protection series 175
Shim ring DIN 988, steel, plain
Repair façade construction screw with hexagon head and sealing washer Faba® type A
Cable ties, KBL INOX, AISI 304 stainless steel With ball seal
Ratchet for 10 mm bits
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)
Screwdriver slotted striking cap with hexagon shank
Pneumatic impact screwdriver DSS 1/2 inch Premium Power
Insert, flat sealing EN1254, gunmetal, 4372