Turnbuckle closed form DIN 1478, zinc-plated steel
DIN 1478 steel zinc plated closed shape
TURNBCKLNUT-CLSD-DIN1478-(A2K)-M20
Register now and access more than 125,000 products
Turnbuckle sleeves in accordance with DIN 1478 must be assembled with weld-on ends in accordance with DIN 34828 from the same material (S235JR). In this case, the load capacity of the turnbuckle sleeves is always greater than that of the weld-on ends. When assembled with connecting parts made from other materials—especially materials with a higher tensile strength—the load capacity of the turnbuckle sleeves must be checked separately.
Datasheets(X)
CAD data (available after login)
 | |
Standards | DIN 1478 |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Thread type x nominal diameter (D) | M20 |
Last viewed
Precision screwdriver, flat slotted
NP profile double cylinder In 6-pin system
Fleece sanding belt For electric grinding file
Cover cap, AW drive For D-anchors
Vehicle dry abrasive paper strip RED PERFECT®
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Hot air blower HLG 2300-E POWER
Nail anchors
Stretch-fit polo shirt
Horizontal clamp Basic With horizontal base and oil-resistant plastic handle